Re: [Elecraft] Observing TX signal

2010-10-18 Thread Ron D'Eau Claire
Glad I could help Al - 73, Ron AC7AC From: Al Lorona [mailto:alor...@sbcglobal.net] Sent: Sunday, October 17, 2010 9:17 PM To: Ron D'Eau Claire; Elecraft Reflector Subject: Re: [Elecraft] Observing TX signal From: Ron D'Eau Claire With the RS232 cable to the K3 di

Re: [Elecraft] Observing TX signal

2010-10-17 Thread Al Lorona
From: Ron D'Eau Claire With the RS232 cable to the K3 disconnected, ___ Thanks very much, Ron. Al W6LX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmf

Re: [Elecraft] Observing TX signal

2010-10-17 Thread Ron D'Eau Claire
With the RS232 cable to the K3 disconnected, the P3 continues to "sweep" (display signal as it arrives) while transmitting. The best way to display SSB is to use averaging and peak modes to show you the spectrum distribution over time. Ron AC7AC -Original Message- When observing your own

[Elecraft] Observing TX signal

2010-10-17 Thread Al Lorona
When observing your own SSB transmitted signal on the P3, does the display update while you transmit, or only once when you return to receive, or ??? If the P3 does happen to sweep and display the transmitted signal, is it an accumulation of all of the audio since you went into transmit, or only