I believe the Acom 2S1 was designed for Yaesu FT1000MP transceivers. To use
one with an Elecraft you need another device to convert the inhibit voltage.
John KK9A
Morgan Bailey NJ8M wrote:
I think that here is your answer:
This is where Fred Cady’s book “The Elecraft KPA500 Amplifier and KAT500 Tuner”
really helps out. It has an excellent discussion about using the KPA500 with
two radios (but not at the same time…).
The RF paths need to be switched with a good RF switch, making sure that very
little signal from
It's a bit pricey, but I use the 1A2R switch from 4O3A:
https://4o3a.com/1-amp-2-radios-switch
Works great, switches my KPA between two rigs...
Frank, W2YK
On 2/4/2021 1:10 PM, Morgan Bailey wrote:
I think that here is your answer:
W2IHY has switch box solutions that should do the trick.
Tim
On Thu, Feb 4, 2021 at 11:57 AM Lou W0FK wrote:
> NJ8M wrote
> >> Ideally, I could turn off the K3S, switch the feedline from the K3S to
> >> the
> >> 101ZD, and have use of both the tuner and amp. Is there an easy way to
> >> do
>
NJ8M wrote
>> Ideally, I could turn off the K3S, switch the feedline from the K3S to
>> the
>> 101ZD, and have use of both the tuner and amp. Is there an easy way to
>> do
>> this? Perhaps one of those breakout boxes? Any hints appreciated!
I use a StationProII, which unfortunately is no
I think that here is your answer:
https://www.dxengineering.com/search/brand/acom/product-line/acom-2s1-automatic-two-transceiver-commutators?autoview=SKU=Default=Ascending
Granted it is pricey but will probably work for you.
73, Morgan NJ8M
On Thu, Feb 4, 2021 at 10:48 AM Chuck Chandler
I've been using the K3S, P3, KPA500 and KAT500 as my main radio. All three
antennas are selected by the KAT500. I also have a second radio, an older
Yaesu FT-101ZD. This rig can be switched into the lineup in place of the
K3S. I sometimes enjoy using the older rig. In this manner the FT101ZD
7 matches
Mail list logo
