I have K3 s/n 3400 plus which I’ve owned since. I have come across an odd
problem. Occasionally when tuning across any band, the display suddenly jumps
from 14023 to a frequency in the 80-100 MHz area. The only way to fix it is to
turn the radio off and then back on. Of course, it is an intermi
th.net On
Behalf Of Steve
Sent: Friday, April 27, 2018 1:03 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Odd problem
I have K3 s/n 3400 plus which I’ve owned since. I have come across an odd
problem. Occasionally when tuning across any band, the display suddenly jumps
from 14023 to a freque
Hi Steve;
Your FPF, Front Panel Flash, is corrupt.
Confirm by going to Config Menu "XV1 ON", then tap 1 thru 9 and you will
probably see a transverter (usually 9) set to "YES" when you have none.
Set all to "no" (unless you have one).
Then RE-load just the FPF with the K3 Utility.
Keith WE6R
I put up a new 160m dipole and SSB signals sound like something is pumping
with AGC in the slow mode. SSB Stations sound much better with fast AGC. I
have a Dunstar 600 but since I am using the aux ant jack it's not in the
receive circuit.
Perhaps I should reconfigure to add the Dunstar. BTW, w
Dick,
What firmware level are you using? There have been some AGC
improvements lately.
Also, try reducing the slope setting (CONFIG: AGC SLP) to the point
where weaker signals produce slightly weaker audio than a strong signal.
The dipole has more gain than the K9AY loop, so you may need to ad
5 matches
Mail list logo