Somewhere, not too far after the introduction of the P3, Elecraft seems
to have received some inferior RG-58 patch cables with BNC connectors
from a supplier and the problems were several. In my case, at narrow
spans [20 KHz or so], the baseline would just drift up. Putting my hand
on top of
I had problems similar to what you describe when I first got the P3. The
story is simple: Use a mil-spec RF patch cable between the K3 and the
P3. The long story: I tried grounding straps, redoing the station ground
system, checking all antenna connections, was sent a couple of
replacement cabl
On 4/7/2014 4:55 PM, stephen pearce wrote:
My P3/K3 combination (with pa and atu) seems to have developed a big spurry
on the spectral display of the P3 which sits around
the mid point of the display (the tuned frequency)
One possible cause is bad coax between the P3 and K3.
73, Jim K9YC
_
No such thing here with same equipment.
Best take a digital shot of the screen and send it
to Elecraft.
73, Phil W7OX
On 4/7/14, 4:55 PM, stephen pearce wrote:
Hi
My P3/K3 combination (with pa and atu) seems to have developed a big spurry
on the spectral display of the P3 which sits around
Hi
My P3/K3 combination (with pa and atu) seems to have developed a big spurry
on the spectral display of the P3 which sits around
the mid point of the display (the tuned frequency) .. it is initially (on
turn on) worse and gradually subsides as things warm up (I presume)
though never goes away en
5 matches
Mail list logo
