It happens with two different OSs and two different programs.
The best place to look first is the common elements.
73 Bill AE6JV
On 10/26/18 at 5:00 PM, ghyoung...@gmail.com (Grant Youngman) wrote:
Why do you presume it is a fault of the P3 and not something
funky happening with whatever
Why do you presume it is a fault of the P3 and not something funky happening
with whatever software you’re running on your PC?
Grant NQ5T
K3 #2091 KX3 #8342
> On Oct 26, 2018, at 7:46 PM, Bill Frantz wrote:
>
> I have the same problem with wsjt-x running from a Mac. When I change bands,
>
I have the same problem with wsjt-x running from a Mac. When I
change bands, the center frequency changes. Very annoying since
it moves part of the display outside of the 17M and 12M bands.
73 Bill AE6JV
On 10/26/18 at 2:47 PM, k6...@foothill.net (Fred Jensen) wrote:
I think that may be a
nt: Friday, October 26, 2018 3:52 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3: Span limits move when changing bands
It may be a timing issue. It only happens when the software [N1MM+ in my
case] sends a frequency command. It rarely happens for me when I make the
first frequency change.
' ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3: Span limits move when changing bands
I guess maybe I need to fire up N1MM+ to see what happens here. Dxbase
seems to work fine and so does DX4WIN.
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
I believe I heard of this "problem" before. It needs to be addressed
with the N1MM+ folks for a possible fix.
73,
Don W3FPR
On 10/26/2018 4:52 PM, Fred Jensen wrote:
It may be a timing issue. It only happens when the software [N1MM+ in
my case] sends a frequency command. It rarely happens
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3: Span limits move when changing bands
It may be a timing issue. It only happens when the software [N1MM+ in my case]
sends a frequency command. It rarely happens for me when I make the first
frequency change. Returning to the first band
It may be a timing issue. It only happens when the software [N1MM+ in
my case] sends a frequency command. It rarely happens for me when I
make the first frequency change. Returning to the first band, it
usually happens. And you're right, it is annoying.
73,
Fred ["Skip"] K6DGW
Sparks NV
] On Behalf Of K9MA
Sent: Friday, October 26, 2018 1:12 PM
To: w...@tx.rr.com
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3: Span limits move when changing bands
I haven't noticed that large a shift, but sometimes 0.5 kHz or so.
Scott K9MA
--
Scott Ellington
--- via iPad
I haven't noticed that large a shift, but sometimes 0.5 kHz or so.
Scott K9MA
--
Scott Ellington
--- via iPad
> On Oct 26, 2018, at 8:01 PM, Randy Farmer wrote:
>
> First sent this to Skip rather than the list...
>
>> This appears to have been a problem from the time of the
First sent this to Skip rather than the list...
This appears to have been a problem from the time of the introduction
of the P3. It seems to be triggered when a frequency command is issued
to the radio via the P3 comm port. Is there any hope on the horizon
for curing this extremely annoying
It's in fixed-tune mode. The span window width stays constant, as it
should, it's positioning in the band changes, always by +5 KHz. Another
reply advised in a direct email that this is indeed a "feature" and is
related to how the band change is initiated. I can't think of a reason
why it
Skip,
The P3 span is the same in both cases (20kHz). If your P3 is set to
Tracking mode, you can expect that if your K3 VFO has been changed from
7030kHz to somewhat above that frequency (VFO frequency is always in the
middle of the display).
If your P3 is in Fixed mode, I believe it should
FW: 1.60
Fixed Tune mode
No SVGA
Connected to K3 RS-232 serial port
The "span window" on my P3 will often move up by exactly 5 KHz when I
change bands. For example, on 40 with a 20 KHz span and the span window
going from 7020 to 7040, if I go to another band and then come back to
40, the
14 matches
Mail list logo
