The Problem recovers.
I wou;ld Clean All Cables, Sockets and Plugs
Power Supply Connections FIRST.
Ray WA6VAB K3
From: Michael Carter
Sent: Monday, November 29, 2021 9:08 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 Issue
Ken,
I have not experienced the difficulty
with my P3
Ken,
I have not experienced the difficulty
with my P3 that you encountered,
but the fact that both the P3 front
panel display and the external SVGA
display shut down indicates a problem
with data not being provided to either
display driver system OR there is a
thermal problem with one of the
onboa
About 8 hours into CQWW CW, one of my P3's bandscope function stopped
working. I checked the cables. I powered the unit off. When it came on, it
worked for a few seconds. The outboard monitor worked for a few seconds.
Then it stopped working. I did this a few times with the exact same
results. I ne
Firmly wiggling the cables (for the 3rd time) resolved the problem.
Something is probably loose inside. Thanks to those who responded for the
suggestions.
73, Ken, K6LA / VY2TT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
You could first check if you get stable connection using the
PX3-utility. If that does not work, it could be an unstable power supply
issue (0,5A ~12V required).
Otherwise I suppose there is a loose connection inside of the P3. You
could check the cable from the main board to the display. The man
Could the P3 be in DispTest mode?
Select Menu, the rotate the knob to ;this setting. Needs to be Off for normal
use.
Tom W4KX
From: Ken Widelitz
Sent: Monday, January 11, 2021 5:48 PM
To: Elecraft Support; Elecraft Reflector
Subject: [Elecraft] P3 Issue
P3 stopped working. When turned on, the
P3 stopped working. When turned on, the entire screen flashes from red to
green to blue to blank to grey to checkerboard to grey and then cycles
through those screens again, etc. I have done a reinitialization by holding
down the Label key while turning on the power. Nothing changes.
73, Ken, K6LA
It appears that I got a defective cable from Elecraft. There's a first time
for everything. I was using the single cable from the P3 to the K3S. When I
swapped it for the double connected P3 to K3S cable, it worked.
This after an hour of reloading firmware, plugging and unplugging...and finall
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
When I turn off the P3 and then turn it back on again I lose all my settings.
They revert to the factory settings. It doesn't do it every time but maybe
half the time. Seems to be getting worse.
It's a pain resetting the parameters I want after this happens.
Regards, Tom, W0ZR
__
up to
the error.
73,
Jack - WE5ST
From: pkhjr
To: elecraft@mailman.qth.net
Sent: Thu, March 22, 2012 9:05:42 AM
Subject: Re: [Elecraft] P3 Issue
I'm a newbie having just acquired a used P3. I installed the latest firmware
and twice now I have gotten a
I'm a newbie having just acquired a used P3. I installed the latest firmware
and twice now I have gotten a fatal error and it occurs after changing bands
not sure of the previous keystrokes.
73 Tex
ka5y
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Issue-tp7387005p739
Thanks Dave, I've been able to duplicate the bug. (It's really helpful
to have a specific list of key presses; thanks.) I'm hot on the trail
and hope to have a fix shortly.
Alan N1AL
On Mon, 2012-03-19 at 12:50 +, Dave Brackett - AK4CL wrote:
> We were demonstrating the P3 at the Kennehooc
We were demonstrating the P3 at the Kennehoochee Hamfest and discovered glitch
which can be repeated using the following steps:
Install all firmware
Reset
FixTrack > Fix-Tune Mode
Band Change > display freeze
Turn off
Turn on > Fatal Error (In: ddc_set_coef(); Span=0)
Any suggestion
15 matches
Mail list logo