Hello Wayne,
are you still planning "to get it out of the box"?
tnx
Volker
DL4ZBG
-Original-Nachricht-
Betreff: Re: [Elecraft] P3IQ
Datum: 2018-07-28T18:45:02+0200
Von: "Wayne Burdick"
An: "David Gilbert"
To use the P3’s I/Q signals with software ap
To use the P3’s I/Q signals with software applications, you have to format the
data like a USB sound card, a standard that is widely used and requires no
special drivers. A significant amount of firmware is required at the P3 end,
but we’re definitely looking at this.
In answer to an earlier qu
I never understood why the P3 didn't have I/Q outputs in the first
place, and I remember pleading for them well before the P3 was
finalized. It never made sense to me to have to have to add additional
hardware to make use of other software that used I/Q outputs when the P3
clearly generated
The ability to manipulate the signals via software is a plus, and if it
is done in software, one could also integrate the software via Win4K3 /
com0com for CAT integration multiple ways to skin the "cat".
73,
__
Clay Autery, KY5G
(318) 518-1389
On 28-Jul-18 10:01, D
)
What bandwidth shall be available - 96 kHz
TNX
Volker
DL4ZBG
-Original-Nachricht-
Betreff: [Elecraft] P3IQ
Datum: 2018-07-28T15:31:42+0200
Von: "Wayne Burdick"
An: "donw...@embarqmail.com"
Nice explanation, Don.
However, when we do an I/Q add-on for the
Dave,
My opinion is that there is no need for the SDRPlay, and you can have
better integration with the K3/P3.
73,
Don W3FPR
On 7/28/2018 10:11 AM, Dave Fugleberg wrote:
Aha, NOW the proposed add on module makes sense to me... assuming one
already has a P3 (as I do), adding this will make th
Aha, NOW the proposed add on module makes sense to me... assuming one
already has a P3 (as I do), adding this will make the P3 appear as a USB
device to SDR software on a PC (much like a SDRPlay or RTL SDR dongle.
Correct?
What will be the advantages of this versus connecting a SDRPlay, etc to the
Hi Wayne,
as you stated, we only need it digital (e.g. USB)
What bandwidth shall be available - 96 kHz
TNX
Volker
DL4ZBG
-Original-Nachricht-
Betreff: [Elecraft] P3IQ
Datum: 2018-07-28T15:31:42+0200
Von: "Wayne Burdick"
An: "donw...@embarqmail.com"
N
Nice explanation, Don.
However, when we do an I/Q add-on for the P3, it will be fully digital (like a
USB sound card), not analog (like the KX3’s RX I/Q outputs).
These digital signals already exist in the P3; we just need to repackage them
for use with a computer.
Wayne
N6KR
Don Wilhelm w
9 matches
Mail list logo