"The last bug" concept is countermanded by the superior law: "Nature abhors
a vacuum". This of course means that when the "last bug" is fixed that
firmware will self-morph under cover of darkness to produce another bug to
fill the vacated space. If you have been keeping careful records on these
i
As one with acute P3 withdrawal using my KX3 instead of my
K3+P3, I'm looking forward to my PX3 actually shipping.
I did have a lot of fun with the KX3 while in New Hampshire.
With all its built in features (Dual watch, DVR etc.), I have a
bunch of money yet to spend on my K3.
I'm expecting
Hi John,
We're just now cleaning up "the last bug," which was a bit challenging. Trust
me, we're just as anxious to ship as everyone else is to receive.
The manual was blessed today and should be posted soon.
Wayne
On Aug 25, 2014, at 6:05 PM, John_N1JM wrote:
> Anyone received notice of shi
Anyone received notice of shipment outside of Field Testers?
John N1JM
-
73, John N1JM
K3 #5986
P3 #1752
KPA500 #596
KX3 #926
XG3
XG1
--
View this message in context:
http://elecraft.365791.n2.nabble.com/PX3-Anyone-tp7592533.html
Sent from the Elecraft mailing list archive at Nabble.com.
Thanks Wayne for the new PX3 FAQ's when might we see the PX3 in our shacks I
would say the middle of August has passed by.
K6CG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/
Hi all,
Near the bottom of our PX3 page (http://www.elecraft.com/PX3/px3.htm) you'll
find links to the product data sheet, as well as two new FAQs: one on
PX3/panadapter basics and one on installation/setup. These will be expanded as
additional questions or issues come up.
73,
Wayne
N6KR
Its mid August does anyone have their PX3 out there? if so any feedback?
Thanks.
K6CG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.q
Wayne posted this two days ago, in reply to a
message at the KX3 Yahoo group re "PX3 Ship Status":
We've delivered a number of field-test units, and the FTs are apparently having
lots of fun while helping us clean up some final firmware issues. We'll update
status again next week.
73,
Wayne
Anyone received PX3 yet?
-
73, John N1JM
K3 #5986
P3 #1752
KPA500 #596
KX3 #926
XG3
XG1
--
View this message in context:
http://elecraft.365791.n2.nabble.com/PX3-tp7592236.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Are the PX3 and 2 meter module for the KX3 shipping?
K6CG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: h
Any PX3 delivery rumors? It's the end of july.
John N1JM
-
73, John N1JM
K3 #5986
P3 #1752
KPA500 #596
KX3 #926
XG3
XG1
--
View this message in context:
http://elecraft.365791.n2.nabble.com/PX3-tp7591792.html
Sent from the Elecraft mailing list archive at Nabble.com.
Posted Today:
First shipments will start at the end of July to early August.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/PX3-SHIPPING-tp7591206p7591224.html
Sent from the Elecraft mailing list archive at Nabble.com.
Any update on the PX3 shipping dates? the website as June 16th as its last
refresh on shipping dates. Thanks to all.
K6CG/VE1 for the summer
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://m
Hm, K3 to LP-PAN (or Softrock) to PX3? IIRC, at least one person has cut
down a P3 to be physically smaller for travel.
73, doug
On 10-Jun-14 21:53, Alan Bloom wrote:
On 06/10/2014 12:38 PM, Eric Ross wrote:
So how are they different other than cosmetic attributes?
The input to the P3 is an
Hi,
Would anyone else aside from me like to have user configurable band limits
on the KX3?
I split my time between ITU Region 1 and Region 2 which have different
allocations for 80M, 60M, 40M and 6m. The KX3 being very portable is great
to take with me on my travels. My not as portable IC
Thanks for the replies. I wasn't aware that the internal KX3 tuner couldn't
be used so thanks for clearing that up.
I use my kx3 99% of the time from my office. Not much for hauling it out to
the seashore or mountain tops. Additionally, the extra $300.00 puts a cramp
in my plan. Another couple of h
craft-boun...@mailman.qth.net] On Behalf Of Phil
Wheeler
Sent: Saturday, May 10, 2014 10:45 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Px3 or KPA100?
I imagine he's referring to the optional tuner
inside the KXPA100.
As to the amp or the panadapter, unless Jim is an
"always
oot".
Bruce
N1RX
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of HREFAB
Sent: Saturday, May 10, 2014 3:09 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Px3 or KPA100?
Ok, so if you were in the market for a new piece of Elecraft Technology
point of the antenna
itself. Therefore, the internal tuner of the KX3 is only in use when running
the KX3 "barefoot".
Bruce
N1RX
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of HREFAB
Sent: Saturday, May 10, 2014 3:09 AM
To: elecraft@mail
://www.hobbypcb.com/
They will also have a booth in Dayton. If you visit Elecraft in Dayton, you
may wish to visit them as well.
73
Johnny VR2XMC
寄件人︰ HREFAB
收件人︰ elecraft@mailman.qth.net
傳送日期︰ 2014年05月10日 (週六) 3:08 PM
主題︰ [Elecraft] Px3 or KPA100?
Ok, so if you were in the market for a
Ok, so if you were in the market for a new piece of Elecraft Technology (and
who isn't?) what would you get? A KXPA100 amp or the new PX3 Panadapter?
I've got my order in for hte Panadapter , but I'm wondering if I should
throw a few more dollars on it and get the amp. This way I could sell my
IC70
Eric said at Visalia that all required cables are included.
/Rick
On Fri, Apr 18, 2014 at 11:26 PM, Benny Aumala wrote:
> Many have ordered PX3. It might be interesting to know,
> if a set of cables are included or available as option.
> I would like to have them delivered with PX3.
> A set mig
I think that as no cables were listed separately on the order form that all
required are included.
Sent from my iPhone
...nr4c. bill
> On Apr 19, 2014, at 3:11 AM, Benny Aumala wrote:
>
> Correction:
> - 5 ft battery cable (not 15, sorry)
>
> Benny OH9NB
>
Correction:
- 5 ft battery cable (not 15, sorry)
Benny OH9NB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Many have ordered PX3. It might be interesting to know,
if a set of cables are included or available as option.
I would like to have them delivered with PX3.
A set might be as:
- 15 ft battery cable
- 12 inch 3,5mm male right angle to 3,5mm male right angle stereo
- 12 inch 2,5mm male right angle
Estimating July.
Wayne
N6KR
On Apr 8, 2014, at 8:08 AM, "Don Butler" wrote:
>
> Have target dates for production and shipping of the PX3 been announced?
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/
Have target dates for production and shipping of the PX3 been announced?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This l
ments might be a
consideration, but I suspect that is OK since the KX3 is designed
with that in mind.
My thought was how there might be an incentive to get the PX3 if one
had both radios.
73, Ed - KL7UW
--
From: Don Wilhelm
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] PX3
Messa
: elecraft@mailman.qth.net
Subject: Re: [Elecraft] PX3 case for P3?
Hi Bruce. I was looking at the PX3 case today. It's not very deep and the
current P3 won't fit in there. And Eric did confirm that.
Some people have cut the stock P3 sides, top and bottom shorter to achieve a
simil
When is the PX3 going to be available for shipping?
You mentioned several software-firmware updates for the PX3 that are
planned.
What is the general schedule for each of these updates after initial
product shipment?
When is the manual for the PX3 going to be ava
, DL4AC
-- Weitergeleitete Nachricht --
Von: "Allen Patterson"
Datum: 05.04.2014 19:03
Betreff: [Elecraft] PX3
An: "Elecraft@mailman.qth.net"
Cc:
When is the PX3 going to be available for shipping?
You mentioned several software-firmware updates for the PX3 that are
plann
On 4/5/2014 1:07 PM, Uwe Hermanns wrote:
Hi,
is the frequency responce of the KX3-IQ really flat over 250 kHz?
73 de Uwe, DL4AC
-- Weitergeleitete Nachricht --
Von: "Allen Patterson"
Datum: 05.04.2014 19:03
Betreff: [Elecraft] PX3
An: "Elecraft@mailman.qth.net&quo
Hi Bruce. I was looking at the PX3 case today. It's not very deep and the
current P3 won't fit in there. And Eric did confirm that.
Some people have cut the stock P3 sides, top and bottom shorter to achieve
a similar profile.
73 jeff wk6i
On Saturday, April 5, 2014, Bruce Beford
wrote:
> Pleas
gt;>> fact, there are some words about this in the KX3 manual.
>>>
>>> 73,
>>> Barry
>>> K3NDM
>>>
>>>
>>>
>>> On 4/5/2014 1:07 PM, Uwe Hermanns wrote:
>>>> Hi,
>>>>
>>>> is the fre
atum: 05.04.2014 19:03
Betreff: [Elecraft] PX3
An: "Elecraft@mailman.qth.net"
Cc:
When is the PX3 going to be available for shipping?
You mentioned several software-firmware updates for the PX3 that are
planned.
What is the general schedule for each of these updates after initial
product shipme
Hi Ed,
no, just baseband audio. Maybe you mixed up kHz and MHz when I was
asking for 8 kHz? That's not the 8.215 MHz IF of the K3. ;-)
73, Olli
Contest, DX & radio projects: http://www.dh8bqa.de
Am 05.04.2014 20:56, schrieb Edward R Cole:
So that sounds like it can be used with the 1st IF
l.
>
> 73,
> Barry
> K3NDM
>
>
>
> On 4/5/2014 1:07 PM, Uwe Hermanns wrote:
>> Hi,
>>
>> is the frequency responce of the KX3-IQ really flat over 250 kHz?
>>
>> 73 de Uwe, DL4AC
>> -- Weitergeleitete Nachricht ------
>>
Read the data sheet.
"The PX3 uses the KX3’s baseband RX I/Q signals. It is not compatible with the
8.2-MHz I.F. signal from the K3."
http://www.elecraft.com/manual/PX3%20Data%20Sheet%20rev%20B1a.pdf
wunder
K6WRU
On Apr 5, 2014, at 1:56 PM, Edward R Cole wrote:
> So that sounds like it can b
Hmm. I don't think it uses any IF, I read it as I/Q (audio spectrum) with
ability to show frequency adjusted for "offset".
Sent from my iPhone
...nr4c. bill
> On Apr 5, 2014, at 2:56 PM, Edward R Cole wrote:
>
> So that sounds like it can be used with the 1st IF of the K3. Having both
> ra
Hi Don and All,
Wayne already answered this question. The PX3 is designed to accept
the KX3's I/Q outputs and will not work with the K3's IF output. I
belive Wayne anticipated this type of quesion and posted a note
specifically to answer it.
73,
matt W6NIA
On Sat, 05 Apr 2014 15:17:00 -0400,
Ed,
In my current ignorance, I don't know if the PX3 has an RF input. The
literature says it uses the RX I/Q as input - which means it will not
handle the 8 MHz IF output of the K3.
It may be possible if one feeds the K3 IF output to an SDR device
(Softrock RX, LP-Pan, SDR-IQ, etc) which does
So that sounds like it can be used with the 1st IF of the K3. Having
both radios that makes the PX3 even more attractive. Size is really
nice for portable operating with KX3. And feed thru of computer
control of KX3, nice!
Guess we need to add to the piggy bank for one!
73, Ed
On Apr 4, 2
Any hope of a P3 (no bells and whistles) with the PX3 form factor?
73 de Brian/K3KO
-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2247 / Virus Database: 3722/6804 - Release Date: 04/05/14
__
Elecra
When is the PX3 going to be available for shipping?
You mentioned several software-firmware updates for the PX3 that are planned.
What is the general schedule for each of these updates after initial product
shipment?
When is the manual for the PX3 going to be available?
73
Allen Patterson, KC7S
I believe a similar problem exists to some extent on the K3. You really
need to use the RF gain, NR an other noise mitigating methods to
eliminate thumping when in QSK mode on the K3. IF you have a very quiet
environment you might be OK. I usually run the K3 on Semi-BK in and run
the delay to
... and the "absolute S-Meter Mode" isn't implemented until now, too...
73 de Uwe, DL4AC
Am 05.04.2014 18:06 schrieb "Mark Newbold" :
> I'd like to see Elecraft fixing the KX3's bugs before moving on to the
> next product. In particular, the horrible thumping QSK needs to be fixed
> ASAP.
>
> See
I'd like to see Elecraft fixing the KX3's bugs before moving on to the next product. In particular,
the horrible thumping QSK needs to be fixed ASAP.
See: "2013 Contest Radio Performance" talk by Rob Sherwood
http://www.youtube.com/watch?v=SOf2OOGeGi8
(Jump to 17 min 23 sec)
"QSK a big disappoin
Please consider the possibility of offering an enclosure option for the P3.
In many cases, it would be nice to have the P3 in a case footprint similar
to the PX3. Perhaps with the sheet metal design work already done for the
PX3, this would not be cost prohibitive. Possible?
73,
Bruce
N1RX
Jeff Scaparra wrote:
> How is [the PX3] any better than using the IQ out and computer?
Hi Jeff,
A PC can work well, assuming it's fitted with a high-performance sound card,
and that you're careful with cables and system grounding. This is sometimes
hard to do, especially in a portable situa
Richard
I suspect your not alone.
The sensor connection on the P3 has been sitting unused since day one and
should have been on the top of the list for awhile i would have thought but
nothing has been announced yet.
I have requested numerous times for info but not got a reply.
Gary
Vk1ZZ
K3, KX3
On Apr 4, 2014, at 2:46 PM, Oliver Dröse wrote:
>
> Will it support both 0 ans 8 kHz "IF"?
Yes, and it will automatically re-center the display based on the shift
selection, mode, filter bandwidth, etc.
73,
Wayne
N6KR
__
Elecraft
A mini P3. I was hoping for a station monitor to show things going out. The
P3/PX3 can show us things our ears can hear, a station monitor could show us
things we cannot hear. Maybe in the future.
K6CG
__
Elecraft mailing list
Home: ht
Will it support both 0 ans 8 kHz "IF"?
Thanks,
Olli
--
Contest, DX & radio projects: http://www.dh8bqa.de
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: m
601 - 653 of 653 matches
Mail list logo