While tuning the KX3 I've noticed the noise floor jump up on the PX3. Seems to
do it on all bands. Is this normal? Anyone have any idea about when fixed mode
tuning will be issued in non beta form?
__
Elecraft mailing list
Home: http:
Thanks to all who responded. Eric's explanation resolved the issue completely.
Thank you sir!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@m
No such problem here. Encoder noise?
Phil W7OX
On 6/16/15 8:54 AM, GDR wrote:
While tuning the KX3 I've noticed the noise floor jump up on the PX3. Seems to
do it on all bands. Is this normal? Anyone have any idea about when fixed mode
tuning will be issued in non beta form?
__
On my K3/P3, I get a rise when the cursor crosses a screen boundary. Lasts a
second or so.
73, Mike NF4L
> On Jun 16, 2015, at 11:54 AM, GDR wrote:
>
> While tuning the KX3 I've noticed the noise floor jump up on the PX3. Seems
> to do it on all bands. Is this normal? Anyone have any idea abo
The RX noise floor in the K3 is not likely changing in this case. If you are
using signal averaging on the PX3, the average resets each time you change
frequency. As a result the noise floor will be non-averaged during continuous
tuning and appear higher. Once you stop it will average over the n
Of course, I meant KX3. :-)
Eric
/elecraft.com/
On 6/16/2015 12:07 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
The RX noise floor in the K3 is not likely changing in this case. If you are
using signal averaging on the PX3, the average resets each time you change
frequency. As a result the noise f
Right. If you are in fixed-tune mode the averaging does not reset
except when the VFO runs off the edge of the screen. In tracking mode
the averaging resets every time the VFO moves more than about one pixel
on the display.
Alan N1AL
On 06/16/2015 12:07 PM, Eric Swartz - WA6HHQ, Elecraft w
7 matches
Mail list logo