__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
an.qth.net On
Behalf Of N2TK via Elecraft
Sent: Saturday, 20 May, 2023 15:51
To: m...@sj2w.se; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Power spike early K3
I had the same problem with the K3/KPA1500 combination. I recalibrated the
K3. Then I made sure I don't run the K3 at exactly
45 am
Subject: [Elecraft] Power spike early K3
Hi,
We have an early serial K3 which has got an issue with power spikes. I have
done a TX gain calibration without it making a difference. The spike
happens mainly when you have changed to a new band and during the first
transmission. After that the spike
I had a similar problem and traced it to voltage sag under load at the K3. The
power supply was good under load but there was too much loss in the stock cable
which was wired directly to the PS. I replaced it with a heavier, shorter
cable. I found that I had to run the TX gain calibration twice
Hi Mike,
I saw that you had posted a similar question
in January 2023 and had some suggestions
including running the TX Gain calibration, which
you did, but apparently without effect on the
spiking.
There have been numerous reports of
TX power spikes on first dit or first voice sound.
Some found
Hi,
We have an early serial K3 which has got an issue with power spikes. I have
done a TX gain calibration without it making a difference. The spike
happens mainly when you have changed to a new band and during the first
transmission. After that the spike is a lot smaller and not much of an
issue.
6 matches
Mail list logo