Sent: 27. april 2016 23:39
To: elecraft@mailman.qth.net
Subject: [Elecraft] Procedure: Setting the DSP filters for SSB
One thing on my K3 that's made me wonder if I'm doing it right is how to
adjust the various filters and settings to accomplish two things.
1. During contests, how to best
Thanks to all for the responses. I've been doing wrong the whole. I have not
been using hi and low cut which explains my frustration.
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailma
Well, these are always problems.
1) To avoid the guy 2.5KHz away, cut the high frequency cut off
down low. I frequently operate it at 2.05 or 2.15 KHz. I keep
the low frequency cutoff much more constant at .25 to .36 KHz.
This procedure will keep most of the interfering signal out of
the audi
Don,
Actually the answer to #1 is not difficult at all - use Hi Cut and Lo
Cut when operating SSB. The Width and Shift are best left for CW and
digital modes. Hi Cut and Lo Cut automatically change the center
frequency. Attempting to use Shift and Width in SSB can be a matter of
frustratio
For ssb, you're only real hope is to adjust that interfering guy's
transmitter.
73, Barry N1EU
On Wed, Apr 27, 2016 at 9:38 PM, wrote:
> One thing on my K3 that's made me wonder if I'm doing it right is how to
> adjust the various filters and settings to accomplish two things.
>
> 1. During con
One thing on my K3 that's made me wonder if I'm doing it right is how to adjust
the various filters and settings to accomplish two things.
1. During contests, how to best adjust to hear the station and not the guy
2.5KHz away
2. When trying to hear the weak DX, not be blasted by that guy from F
6 matches
Mail list logo
