Thank Fred, great!Just tried your instructions, and those solved the problem! Obviously.... :)Now PF2 work well, changing 65-100W. The problem is that I hadnt well understood... and really now need to read your (big) book. At this moment I have saved six macros for split/unsplit, THR15/THR07, AMP ON 65W-AMP OFF 100W, plus macros for the K-Pad for switching K3S keys PF1 (split/unsplit), APF ON/OFF, switching XFIL, pressing SPOT, PF2 (65W/100W).Again I have space for 4 other macros, not more. Really I need suggestions from your book to optimize the 8 K3S memories on M1 up to M8 and PF1 - PF2 and optimize the full 16 memories on K-Pad.I have a P3 but without SVGA module, so here I havent the other P3 memories. Another question for you: how you set your NB levels, if agc and dsp-agc? On my K3S NB seem to work barely only at higher if agc setting. Many thanks Fred,Ian IK4EWX
----Messaggio originale---- Da: fc...@montana.edu Data: 22-gen-2017 17.22 A: "elecraft@mailman.qth.net"<elecraft@mailman.qth.net>, "glcazz...@alice.it"<glcazz...@alice.it> Ogg: Re: [Elecraft] wrong macro for PF2? --> Hi Ian, In your macro 5, the SWT27; should be SWT29; to point to macro 6 the next time and in macro 6 the SWT29; should be SWT27; Then, in CONFIG:MACRO just set PF2 to Macro 5. Cheers, Fred KE7X For all KE7X Elecraft books, see www.ke7x.com From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of glcazz...@alice.it <glcazz...@alice.it> Sent: Sunday, January 22, 2017 5:13 AM To: elecraft@mailman.qth.net Subject: [Elecraft] wrong macro for PF2? I am programming two macros for setting 100W and 65w (for amplifier) on my K3S for storing on PF2. I setted on macro 5 (amp on): MN019;MP001;MN255;PC065;MN110;SWT27;SWH47;SWT14;I setted on macro 6 (100w): MN019;MP001;MN255;PC100;MN110;SWT29;SWH47;SWT14; Both work from K3 utility and from K-Pod, then I store them on PF2, in this way: On the K3S I go to CONFIG:MACRO and press "5" HOLD the PF1 key until "PF2 SET" appears Tap the "Menu" keyThen go to CONFIG:MACRO and press "6" HOLD the PF2 key until "PF2 SET" appears Tap the "Menu" key But every time I push (hold way) PF2 it set everytime 100W, dont change 65-100 watts every pushing. It seem that only last storing on PF2 has been saved. Sure something is wrong , even if same kind of setting on PF1 dor split/unsplit work. Can somebody help me? I have bought Fred Cady beautiful book on macros programming, and I will study it, but if somebody can give me a fast solution I will be very happy :) Ian IK4EWX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to fc...@montana.edu ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com