At 04:50 PM 10/03/08, you wrote:
You might be missing the IF NB :)
I'm sure I installed it....I go into config and change it from not
installed to nor..OK
See if it is seated properly. See if there is an enable for
it. Have you used it before?
I'll pop the lid and have a look. I don't think it would show nor if
it was mis-installed.
I haven't tried it before due to other issues. I have #501 and the
ATU doesn't function and there is an intermittent on the mixer board
that injects broadband noise, I think that little pot on the board is
intermittent. I contacted Elecraft last Monday and they said the new
boards were on the way. I found out today they haven't been shipped
yet due to a oversight. I can understand that. So, i thought I would
go ahead and see if I could get the other features adjusted, the rig
does work. Another gotcha it looks like.
I used an anti static wrist band and mat during construction. Having
build a couple K2's and a K1 with no problems I figured a modular K3
would be a snap.
I got the lemon.
Seriously, you should get a display on VFO B. I was playing with it
last night so I think it hasn't disappeared.
I thought I should too.
At 3/10/2008 06:23 PM, you wrote:
On P.24 of the manual, tap NB, HOLD LEVEL, adj VFO A to turn DSP
on and adjust the level, works fine. IF NB shows N/A no matter how
much I adjust VFO B knob. What am I missing? When you turn the NB
on (TAP), how do you know what kind of blanking is taking place,
DSP or IF? Running the latest firmware, 1.75 & 1.57. I know,
RTFM...I think I have.
John
k7up
K2's 2012, 2223
K1 637
Things are more like they are now then they've ever been before.
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
