Should have added
RTS high
DTR high
73,
Tony W7GO
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
You do not need those lines high, indeed I would not recommend it as
these lines can be enabled on the K3 as PTT/Keying lines. In this case
having these lines high will place the K3 in transmit
I have a k3 update that you can add to the radios.ini file for explicit
K3 support in dXbase but it
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brendan Minish
Sent: Tuesday, November 04, 2008 2:21 PM
To: Tony Morgan
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Re: K3 and DXBase
You do not need those lines high, indeed I would not recommend
Bill,
If you are using a USB to serial adapter, try setting the speed as high
as you can - it is counterintuitive, but many adapters have problems at
low speeds but work fine at higher speeds. Again make sure everything
is set for the same speed.
If you possibly can, try using a real serial
4 matches
Mail list logo