: Tue, Sep 14, 2010 10:11 am
Subject: Re: [Elecraft] Setting RS232 baudrate
I didn't read your note carefully enough.
As W4TV correctly points out, the P3 to K3 speed is always 38400. The PC to
P3 speed can be set to 4800 using the P3 front panel or the BR command.
Dick, K6KR
-
Thanks Joe and Dick
All working agn
73 de Dick
- Original Message -
From: "Dick Dievendorff"
To: "'Dick Dievendorff'" ; "'Dick Grolleman'"
;
Sent: Tuesday, September 14, 2010 4:11 PM
Subject: RE: [Elecraft] Setting RS232 baudrate
-boun...@mailman.qth.net] On Behalf Of Dick Dievendorff
Sent: Tuesday, September 14, 2010 6:22 AM
To: 'Dick Grolleman'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Setting RS232 baudrate
Dick, try this to set your speed to 4800:
Start the K3 Utility.
On the Port tab, press "Test c
> So now my micro keyer is not reading the Radio
> any solutions?
The P3 forces the K3 to 38,400 bps whenever it is turned on.
You set the baud rate for the P3 <-> computer (including the
microKEYER) link using the "RS-232" menu item in the P3.
Tap the P3 MENU button
rotate the encoder until R
n. Press "test communications".
The radio should now be at 4800 bps.
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dick Grolleman
Sent: Tuesday, September 14, 2010 6:11 AM
To: elecraft@mai
HI ALL
Just installed version 4.05 in my K3 to run my P3 as well
I always used the microkeyer at 4800 baud from the K3, but I'm not able anymore
to set any other speed in the K3 as 38400. Yes I can change it, but the radio
does not store it when I leave the menu. And I just can't get it to work
6 matches
Mail list logo
