Hi Jo,
Thanks for the very concise description of your problem, how you solved it and
the cause. I think that you may have just stopped me becoming "some other
fool"..
I notice that there are no keys on any of the connectors associated with the
KIO2 AUX2 Board. It looks like keys applied to al
Joe and all,
I might add that one does not have to have a 'proper' keying plug in hand to
do the job - a sliver cut from a toothpick will work, or since one should
not be plugging and unplugging things with power on, even a tight fitting
wire stuck into pin 4 will work fine. I have used both tech
I had (have) a problem, and my intent in this post is to add an article to the
archive so that if some other fool makes the same mistake it may save them some
time in the troubleshooting process.
Description of the problem: The KPA100 and KAT100 are remote in an EC2.
After working on the
3 matches
Mail list logo