Brett,
Thanks for reply. I have to disagree; it is a big deal. A year ago,
using another rig we didn't realize that we had an open mike when wave
files were being transmitted and got reports about the voices in the
background. The team members were not talking loudly. We solved the
problem
Ed .
If you look at http://www.writelog.com/support/wlso2r.pdf it shows how to
set up the mike for SSB contesting. If you ignore the Left Rig and the
W5XD Multi+ keyer and just look at the Right Rig and microphone setup you
will see how to keep the audio from the other ops out of your
It would be nice to have a LINE OUT setting something like =TX/RX
where both the received audio and the transmitted audio were
available at a preset (independent of volume control) level.
It would be very useful in contests to record both sides of a
contact CW or SSB.
73
Stewart G3RXQ
On Wed, 30
Yes it would!
- Original Message -
From: Stewart Baker [EMAIL PROTECTED]
It would be nice to have a LINE OUT setting something like =TX/RX
where both the received audio and the transmitted audio were
available at a preset (independent of volume control) level.
It would be very useful
I completely agree.
I was excited when I saw a recent release note that said that TX audio
would be available on the LINE OUT connector, but then was
disappointed to read further when it said it was controlled with the
front panel volume control and not at a fixed level.
Can we PLEASE get this
I tried to use a K3 in the IOTA contest on SSB but ran into a problem.
I couldn't figure out how to satisfactory key the K3 with wave
files from N1MM Logger and also use a Heil Headset. Reading the manual
it appears that you can have audio input from ONLY the front panel, rear
panel, OR line
...Reading the manual
it appears that you can have audio input from ONLY the front panel, rear
panel, OR line in. The wave files were coming via the line in and the
mike via the Front panel. Did I over look something?
You can have either mic plus LINE input active at the same time. See
Lyle,
Thanks I will check and see what version is loaded.
73, Ed
K3IXD
Lyle Johnson wrote:
...Reading the manual it appears that you can have audio input from
ONLY the front panel, rear
panel, OR line in. The wave files were coming via the line in and the
mike via the Front panel. Did I over
You're probably still going to have a live mic during the transmitting
of a wave file but I don't see that as that big of a deal...
On Tue, 2008-07-29 at 21:49 -0400, Ed Steeble wrote:
Lyle,
Thanks I will check and see what version is loaded.
73, Ed
K3IXD
Lyle Johnson wrote:
...Reading
I ran into this as well. It was a bit tricky but here is what worked:
Writelog as DVK
Cable from headphone out of soundboard to the line in jack on back of K3
Now the tricky part: Select LINE IN as input first! Then set the gain as you
would a mike gain, otherwise the K3 sees zero input from
10 matches
Mail list logo