I was writing about a K3S, but just for you I powered up the K3 that I keep as a
backup and it works too. Are you appending the semi-colon?
BTW, my K3S F/W is 5.62 and the K3 is 5.0.
Wes
On 9/25/2019 3:53 PM, Kidder, George wrote:
GE Wes - Is your success on a K3 or K3s? Just installed lates
lt;- responses in upper case.
> vx;
> VX1;
> vx0;
> vx;
> VX0;
> vx1;
> vx;
> VX1;
>
> 73 de Dick, K6KR
>
>
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net On
> Behalf Of Kidder, George
> Sent: Wednesday, September 25
Behalf Of Kidder, George
Sent: Wednesday, September 25, 2019 15:54
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] VX commands don't work
GE Wes - Is your success on a K3 or K3s? Just installed latest firmware
(5.67) and there is still no SET response to "VX1", although "VX&q
GE Wes - Is your success on a K3 or K3s? Just installed latest firmware
(5.67) and there is still no SET response to "VX1", although "VX" does
GET the state. Just like Don said, but this is not what is in the manual.
George
On 9/24/2019 2:27 AM, Wes wrote:
> [This message came from an externa
Works for me too. Latest F/W installed.
Wes
On 9/22/2019 4:17 PM, David Box wrote:
VXn works for me, don't remember the firmware change that activated the set
feature about a year ago.
de Dave K5MWR
On September 22, 2019 4:30:54 PM MDT, Don Wilhelm
wrote:
George,
The VX command is "GET"
VXn works for me, don't remember the firmware change that activated the set
feature about a year ago.
de Dave K5MWR
On September 22, 2019 4:30:54 PM MDT, Don Wilhelm
wrote:
>George,
>
>The VX command is "GET" only, so you can determine the VOX status, but
>you cannot SET it.
>See the K3 Progr
Hi Dick,
Problem there is that I would have to "press" or "not press" depending
on current state of VOX, and the macro generator (FLDIGI) does not have
that sort of programming ability - at least I don't think so.
But a good thought.
George
On 9/22/2019 6:43 PM, Dick Dievendorff wrote:
> [Thi
Thanks for the prompt reply, Don.
Humm. My copy of the Programmer's Reference, (Rev.G1, March 16, 2017)
says on p28
"VX (VOx State; GET/SET on K3, GET only on KX2 and KX3)"
Guess I have encountered a "feature". No problem - if it's not, it's not.
73 de George, W3HBM
On 9/22/2019 6:30 PM, Don
But maybe you can “press” the VOX button with SWH or SWT.
I’m away from my station so I can’t try it right now.
73 de Dick, K6KR
> On Sep 22, 2019, at 15:30, Don Wilhelm wrote:
>
> George,
>
> The VX command is "GET" only, so you can determine the VOX status, but you
> cannot SET it.
> See th
George,
The VX command is "GET" only, so you can determine the VOX status, but
you cannot SET it.
See the K3 Programmer's Reference Manual.
73,
Don W3FPR
On 9/22/2019 6:16 PM, Kidder, George wrote:
GE all,
I recently tried to incorporate the VX command into some macros for my
older K3. Wit
GE all,
I recently tried to incorporate the VX command into some macros for my
older K3. With the K3 utility connected directly to Com1, the VXn
command has no effect on the VOX state, although other commands work as
expected. I run the VOX on AUTO OFF (CW WT tap 5) to avoid startup
problems
11 matches
Mail list logo