Lads,
I have one of the field test K2s (SN 79, current 2.04 firmware) that
I've recently added a KIO2 board to. To do this I needed to perform
the mods for the XC control board to make it compatible with the KIO
2 (which I have done). This included cutting one trace to the MCU
pin 25, adding two new jumpers and a .001 cap.
After performing the mod (and checking my work twice) I installed the
KIO2 according to the instructions. Changed the sidetone, checked
the voltages, and even ran the test sequence with Hyper-terminal.
All worked OK. Radio works fine with TRX manager, which is also good.
My problem is that I have now lost the voltmeter, although the
ammeter works. So, consequently, I get LO BATT reminders every so
often and the volts/current display shows 0.00V 0.3A. !
Every other aspect of the radio seems to work EXCEPT the voltmeter.
I checked for shorts, bridges, etc.. and could not find any.
Can anyone steer me in the right direction as I'm now at a loss as
to what I could have done to break this feature.
K2, Sn 0079, Firmware 2.04, XC control board
K160RX
KAT2
KBT2
KDSP2
KIO2
KSB2
Thanks for the help.
Ron EI2JP
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com