Bob,
In general I recommend just sticking with the defaults for all AGC
menu entries. We worked hard on these :)
I'm sure others will have some suggestions for you.
73,
Wayne
N6KR
On Oct 4, 2010, at 6:50 PM, riese-k3...@juno.com wrote:
> how bout some gidelines for AGC settings
>
> Bob K3DJC
Wayne,
Thank you for your response. When I first got my radio I tried the F5 and up
setting but found they, to me, muffled the audio. That was many revisions ago
so I will give them another go. I've found in some instances it's better for
me to not use the NR function than to use it and dea
These are my observations first with the K2 and ADSP, the the Flex
radios both 1000 and 5000A and then finally and more recently the
FT-2000 series of radios. You may take this for what it is worth
This matter is highly subjective. One must remember that of the modes
avail
Hi Jim,
My experience is only with CW. If the band is just noisy and the signals are
strong, turning on the NR results in more pleasing listening. But if the
signals are generally weak like they might be on 10 or 15 meters, turning on
the NR usually impairs readability at any setting. I have bett
Have to agree. the issue has inproved with the last
update but the audio is still weak and I find mself really\cranking up
the gain
Bob K3DJC
On Mon, 4 Oct 2010 12:45:31 -0700 Wayne Burdick
writes:
> Dale,
>
> I'll forward this to our DSP engineer, Lyle (KK7P). He's currently
> on
> vacat
to be done.
73 de James
K2QI
--Original Message--
From: Jim Harris
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
Subject: [Elecraft] Volume Level with NR
Sent: Oct 4, 2010 12:04
Hi,
I've noticed recently that when I press NR the volume level drops what could be
Dale,
I'll forward this to our DSP engineer, Lyle (KK7P). He's currently on
vacation but will be able to respond to your comments when he returns.
I do know that he worked very hard to equalize the NR on/off volume
levels, and that in general, users have been very positive about the
K3's no
Wayne,
I am going to disagree - I think its a real issue, and an area for K3
improvement. While I have not been to Jim's shack to hear what he is hearing,
it sounds like what I have always observed, at least for SSB reception.
Engaging the NR significantly reduces the overall audio level.
Jim,
Some drop in apparent volume level is typical with NR. Part of the
drop is due to the removal of noise. Part of it may be a
psychoacoustic effect (sorry, I'm not an expert on this).
You might also try setting F5-1. Settings from F5-x to F8-x use a
different algorithm.
73,
Wayne
N6KR
Hi,
I've noticed recently that when I press NR the volume level drops what could be
called a considerable amount. I normally use NR setting of F-1-1 or -2. More
than that tends to almost mute the receiver. I find that the volume control
needs to be increased about 70 degrees or so to give t
10 matches
Mail list logo
