Dick,
Did you connect the SignaLink to the microphone input or the Line Input
of the K3?
If you are using Line Input, you will have to reconfigure the SignaLink
for Line level output - see the SignaLink instructions - as I recall it
is a jumper inside that must be changed.
Once you get the o
Make sure you're connected properly with Line In and Out. Set the MIC
SEL to the correct input (Line In) while in TX DATA mode.
73,
matt W6NIA
On Sun, 09 Jun 2013 08:46:09 -0700 (PDT), you wrote:
>Hi,
>
>Mr K3 has arrived!!! So far everything has gone well, except one thing. I am
>using
a Si
Try this. Go to "Data A" mode. Set main menu "Mic Sel" to "Line In". Adjust
the "Mic" control to set line in gain up.
David W4DES
K3 #7409
On Jun 9, 2013, at 11:46 AM, Richard W Hemingway wrote:
> Hi,
>
> Mr K3 has arrived!!! So far everything has gone well, except one thing. I am
>
Hi,
Mr K3 has arrived!!! So far everything has gone well, except one thing. I am
using a SignaLink USB, as I had one and used it on my formeer radio. I have
the new cord and jumper wire card installed. It is connected to the wire in,
wire out, and PTT on the radio and into the SL, thence into
4 matches
Mail list logo
