Re: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ?

2013-05-13 Thread Fred Smith
k1bxn; elecraft@mailman.qth.net Subject: Re: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ? On Mon, May 13, 2013 at 9:35 AM, Fred Smith wrote: > Not trying to hijack the thread but which Winford Engineering DB15HD > board are you referring

Re: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ?

2013-05-13 Thread Jim McDonald
I have two Y-adapters cascaded on the back of the K3: First Y: Top Ten Devices Band Decoder (to switch DX Engineering antenna switch on tower) & PR6 Second Y: MicroKEYER II (for FSK & PTT) KPA500 KPAK3AUX cable I connected the wire to the PR6 to pin 11 of the DB15 going to the Top

Re: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ?

2013-05-13 Thread iain macdonnell - N6ML
lman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Greg > Sent: Monday, May 13, 2013 10:13 AM > To: ik1bxn > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" > should be OK ? > > That should b

Re: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ?

2013-05-13 Thread Fred Smith
h.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Greg Sent: Monday, May 13, 2013 10:13 AM To: ik1bxn Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ? That should be OK but quite the rats nest. :

Re: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ?

2013-05-13 Thread ik1bxn
Super ! Fast and shape answer as usual ! Thank you all very much for support, I'll proceed this way so. I just asked Elecraft italian dealer to supply me one original "Y" cable in order to avoid any possible surprise. Best 73 Giorgio - IK1BXN -- View this message in context: http://elecraft.

Re: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ?

2013-05-13 Thread Dick Dievendorff
: elecraft@mailman.qth.net Subject: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ? Hello you all ! Currently I have my k3 connected via an "Y" DB15 cable to KAT500 and cable and PR6. Now I'm purchasing a MicroHam DigiKeyer that needs

Re: [Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ?

2013-05-13 Thread Greg
That should be OK but quite the rats nest. :) I would suggest either an HD15 breakout board from Winford Engineering or see if you can find one of the LDG RCA breakout boxes. I have one of these and it works great for accessing ACCY connections. 73 Greg On 5/13/13, ik1bxn wrote: > Hello you a

[Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ?

2013-05-13 Thread ik1bxn
Hello you all ! Currently I have my k3 connected via an "Y" DB15 cable to KAT500 and cable and PR6. Now I'm purchasing a MicroHam DigiKeyer that needs to be connected to k3 DB15 connector too and uses pins 1-4-5 for FSK and PTT. At the moment I have no place to plug DigiKeyer DB15 connector to.