Thanks for all advice. I looked at my config. settings again checked
com 1 for k3. All is working great now. I thought that I had to set tx
up in the rtty engin under n1mm for com 1 to transmitt, that is what I
get for thinking. Thanks again.
John
___
http://www.w3yy.com/k3.pdf
73
Uwe
DK4WW
-Ursprüngliche Nachricht-
From: Richard Ferch
Sent: Sunday, November 11, 2012 12:23 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] k3 and RTTY hookup question
You should let N1MM Logger do rig control. Assuming you have a serial
cable
You should let N1MM Logger do rig control. Assuming you have a serial
cable between COM1 and your K3's RS232 jack, set the "Radio command"
port in MMTTY to NONE and configure N1MM Logger to use COM1 to control
your K3. That way the frequencies will be tracked in the N1MM Logger
contest log.
If
I have my k3 running well with N1MM and MMTTY thru com1, but frequency
will not track because mmtty uses com 1 for control of rig. What is the
best way to have the K3 track the frequency and mmtty control of the
k3? Is it to use the 15 pin plug on the back of the rig? Not really a
big deal
4 matches
Mail list logo