Re: [Elecraft] Memory Problem

Joe, Your exact sequence works for me. When you say "put in a new frequency" - is that frequency still in the same band as you recorded the M1 frequency? It must be within the same band - the M1 thru M4 memories are *per* band. If you change bands you have a different set of 4 memories that c

[Elecraft] Memory Problem

I am trying to use M1-M4 for frequency recall (DVR not installed). I pick a frequency, tap V>M, TAP M1. I then put in a new frequency, tap M>V and tap M1. I then see a message NOT SET with no frequency change. Can anyone tell me what I am doing wrong Joe W1JGS - Joe W1JGS -- View this me

Re: [Elecraft] memory problem

Steef PA2A wrote: > > Hi, > > I turned on the K3 today and all CW was gone. Pitch had become 000, where > I always use 550. Filter width, LO and HI were giving strange results. > > In LSB on 40 meters, if I tap memory M1-M4 the passband of the signals > become smaller but LO/HI, BW and WIDTH

[Elecraft] memory problem

Hi, I turned on the K3 today and all CW was gone. Pitch had become 000, where I always use 550. Filter width, LO and HI were giving strange results. In LSB on 40 meters, if I tap memory M1-M4 the passband of the signals become smaller but LO/HI, BW and WIDTH do not change. Going to CW and back