Hmmm, not sure why you need to switch off twice, once IS required as noted
in the K3 Manual and that has been the case with mine from day one.
Never had a FW download failure...yep, I got'em crossed now folks...:-)
73's
Gary
On Sun, Dec 12, 2010 at 10:07 AM, wf4o wrote:
>
> Thanks,I haven't he
Thanks,I haven't heard that before, but I will certainly do this from now on.
It does seem to involve the MCU module etc. Thanks again.
On Dec 11, 2010, at 4:00 PM, G4LNA [via Elecraft] wrote:
> I used to get problems when I used to download the firmware and used the rig
> straight away and I f
I used to get problems when I used to download the firmware and used the rig
straight away and I found that if I switched the rig on and off twice in a
row it functions perfectly after that, so I follow that procedure every time
I load the firmware now and never get a problem.
--
View this messag
After shutting everything down and letting it set over night, I downloaded v
4.22 from my macbook pro to the k3 without incident and the radio works
perfectly. This same thing happened when I tried to install the beta
version. Only after shutting down overnight was I able to reinstall v 4.14.
My f
Sounds like either your filter configuration is wrong, or your narrow
filter is faulty. Watch the "XFIL" section of the front panel display
as you narrow the bandwidth and make sure that it switches to the
appropriate filter slots based on what's physically installed. If not,
use the K3 Utility to
. Your 400 Hz filter needs to be
checked for it to be used for receive.
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of wf4o
Sent: Tuesday, December 07, 2010 1:54 PM
To: elecraft@mailman.qth.net
Su
I'm new to the K3 and so my settings may be faulty, buy here goes. I
downloaded and installed the latest firmware today without problem. My
problem is that when I narrow my width to 0.5 I immediately lose all audio.
I have a 400 Hz filter installed. I only regain audio with widening the
width gr
Hi, Jim!
The TCXO screen has a number of "edit controls" which are text boxes that
you type numbers into.
The "Apply" button is enabled (not dimmed out) whenever any of the edit
controls have a value that is different from the value read from the radio,
and all the "edit controls" contain "vali
capobs wrote:
>
> All of "my" parameter numbers provided on my TCXO data sheet went in
> without a hitch. But when I tried to save them to memory, I could not.
> I'd close this feature and then reopen it. The numbers had returned to
> what I'd guess were the parameters used as "baseline" by
Good afternoon, All.
The new PC "utility" and beta firmware are really out of this world. [A bit
melodramatic, I know! But what the hey, I'm an old man and I've earned the
privilege of talking like this. ;-) ]
Oh, how much easier can calibrations be than now?
I do have a question thou
10 matches
Mail list logo
