ne on Christine.
Joe N9JR
- Original Message
From: Don Wilhelm <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Wednesday, November 15, 2006 11:40:43 AM
Subject: RE: [Elecraft] Component ID
Scott,
You will need the 25LC320 for the U7 slot - an LM380N-8 m
Scott,
You will need the 25LC320 for the U7 slot - an LM380N-8 must go into U9.
Check all the 8 pin devices on the black foam again - Christine rarely makes
a packing mistake.
73,
Don W3FPR
> -Original Message-
>
> I am inventorying my k2 kit and have a question.
> On the control board I
Scott,
On the control board, U9 is the LM380 which you should have, and U7 is
the 25LC320 serial EEPROM which you ALSO should have. So it sounds like
you might be missing the LM380, eh?
Well, based on my experience, you should go through everything again
with a stronger source of illuminatio
Hmmm, I did a quick Google search on 25LC320. It said it was an serial
SPI bus EEPROM.
Talk about knock me over. I'm in the middle of configuring software to
talk to ... a SPI bus EEPROM.
If google is right, then the LM380N and 25LC320 are NOT the same thing
...
- Keith "whatdoiknowi'mjustasof
4 matches
Mail list logo
