Re: [Elecraft] Elecraft at Dayton

2011-04-07 Thread David Christ
Don't know about Dayton but at Orlando they were selling items. Either to carry away or have shipped. David K0LUM At 8:51 PM +0800 4/7/11, Johnny Siu wrote: Hello Group, From your past experience, will there be any kit / product selling at Elecraft booth in Dayton? Or, is the booth only for

Re: [Elecraft] Elecraft at Dayton

2011-04-07 Thread Tom Azlin N4ZPT
They have done both at Dayton every year I have been there. Do not know how many of the big kits they have there. But I have bought some of the small items and ordered big ones from their booth. And gotten to see all the radios. 73, tom n4zpt On 4/7/2011 8:51 AM, Johnny Siu wrote: Hello

Re: [Elecraft] Elecraft at Dayton

2010-05-14 Thread rfenabled
Ooooh...yes please Gary VK4FD Sent via BlackBerry® from Telstra -Original Message- From: Peter ZL1PWD pet...@igrin.co.nz Date: Fri, 14 May 2010 20:30:25 To: elecraft@mailman.qth.net Subject: [Elecraft] Elecraft at Dayton Can we have regular updates from attendees as to what is new,whats

Re: [Elecraft] Elecraft at Dayton

2010-05-14 Thread Darin Land
I think the P3 has a scheduled July 15, 2010 ship date. Darin Sent from my iPad On May 14, 2010, at 1:30 AM, Peter ZL1PWD pet...@igrin.co.nz wrote: Can we have regular updates from attendees as to what is new,whats upgraded etc and all the scuttlebut!!! P3 delivery would also be good

Re: [Elecraft] Elecraft at Dayton

2008-05-19 Thread Chris Kantarjiev K6DBG
You can always drive a linear amp with a QRP signal, but under FCC rules, producing more than 480 watts out with 15W in is prohibited for a type-accepted amplifier (15 db gain). Of course! Too much blood in my caffeine stream. But if there were, say, a convenient attenuator pad that could be

Re: [Elecraft] Elecraft at Dayton

2008-05-19 Thread Doug Faunt N6TQS +1-510-655-8604
Date: Mon, 19 May 2008 08:13:09 -0700 (PDT) From: Chris Kantarjiev K6DBG [EMAIL PROTECTED] You can always drive a linear amp with a QRP signal, but under FCC rules, producing more than 480 watts out with 15W in is prohibited for a type-accepted amplifier (15 db gain). Of

Re: [Elecraft] Elecraft at Dayton

2008-05-19 Thread Vic K2VCO
Doug Faunt N6TQS +1-510-655-8604 wrote: Note that the KPA800/1500 was first shown with the K2, and was closely integrated at that time. It would work well with the K2, but it was designed to work with other popular rigs from ICOM, Yaesu, Kenwood, etc. as well. It is not 'closely

Re: [Elecraft] Elecraft at Dayton

2008-05-18 Thread Simon Brown (HB9DRV)
-- From: David and Dianne on Comcast [EMAIL PROTECTED] An S9+60db signal on the main receiver is not heard at all on the sub receiver at all. Erm - can you give an example? My tired brain doesn't understand. Simple Simon

Re: [Elecraft] Elecraft at Dayton

2008-05-18 Thread Lyle Johnson
An S9+60db signal on the main receiver is not heard at all on the sub receiver at all. Erm - can you give an example? My tired brain doesn't understand. A really strong signal being received on one receiver does not bleed through to the other receiver, even though they share the exact same

Re: [Elecraft] Elecraft at Dayton

2008-05-18 Thread Simon Brown (HB9DRV)
OK, I understand (just)! I guess I'll bite the bullet and pay for one on Monday - I would like to monitor two portions of 20m at the same time. Currently using my very capable TS-480SAT on 20m PSK / RTTY, must crank up the K3 :-) I assume that I can use the same antenna for both receivers?

Re: [Elecraft] Elecraft at Dayton

2008-05-18 Thread Lyle Johnson
I would like to monitor two portions of 20m at the same time... I assume that I can use the same antenna for both receivers? Yes, at least with the KAT3 installed. I've not looked at a K3 +KRX3 configuration without a KAT3. 73, Lyle KK7P ___

Re: [Elecraft] Elecraft at Dayton

2008-05-18 Thread Doug Faunt N6TQS +1-510-655-8604
Hear! Hear! I've been slowly assembling some QRO gear to go with my K2, and I would love to have something that is completely integrated with the AUXBUS and works as well as the KPA100/KAT100 combination. I'd be especially keen on a KPA800 that I could drive with just the barefoot K2; my

RE: [Elecraft] Elecraft at Dayton

2006-04-26 Thread Don Wilhelm
Julius, It is a good guess that the new QRP amp will be there on display, along with all the other gear. The booth is larger than before so that will be nice. You can come and watch me build my KX1 - I will be there with a live building demo at the booth, I just arranged that with Wayne and

Re: [Elecraft] Elecraft at Dayton

2006-04-26 Thread [EMAIL PROTECTED]
Don, I've been following the progress of the coming new 800watt and 1500 watt amps, but you mention a QRP amp.did I miss something? Rich k2cpe K2 #1102 -- Don Wilhelm wrote: Julius, It is a good guess that the new

RE: [Elecraft] Elecraft at Dayton

2006-04-26 Thread Don Wilhelm
Sorry folks for the 'fat-finger' on the keyboard - that should have been QRO amp. 73, Don W3FPR -Original Message- It is a good guess that the new QRP amp will be there on display, along with all the other gear. The booth is larger than before so that will be nice.