Tim,

That certainly sounds like a bad solder connection or an unsoldered one to me.
Look in the BFO area first if it effects the filter passband, otherwise the VCO 
area is another possible candidate for suspicion.  Yes, even in something that 
has been working for almost 6 years, an unsoldered connection can still be the 
source of a problem.

Use the schematic and parts placement diagrams in the manual to locate the 
questionable components.

73,
Don W3FPR
 

> -----Original Message-----

> 
> For awhile, I've been experiencing a down shift of about 200 hertz, but
> rarely and randomly in my K2 serial 0063.  It's enough to change the
> characteristic tone in the receiver and degrades from the filter settings.
> Any suggestions as to where to start looking?  Doesn't seem to be
> temperature-dependent but I could be wrong.  And it, randomly, shifts back
> as well.  Thanks.
> 
> Tim K5OI
> Ruidoso, NM
> 

_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to