On Wed, 5 Apr 2006 08:22:01 -0400, Don Wilhelm wrote:
>> There is a new item from MFJ that people may find helpful when
>> interfacing a mic to the K2. Its an MFJ-655 mic equalizer/conditioner/
>> preamp that is supposed to interface any mic to just about any rig.
>I just wonder why would a K2 ow
I just wonder why would a K2 owner want to spend good money for one of those
solely to jumper the mic lines. There is a header to do the same thing on
the rear of the front panel. Elecraft designed it so you can interface any
mic to the K2, but I still believe it is easier to re-wire the mic plug
EMAIL PROTECTED]>;
Sent: Tuesday, April 04, 2006 7:26 PM
Subject: RE: [Elecraft] KSB2 P1 Wiring Questions
Folks,
My advice on mic wiring - unless you must use the mics with multiple rigs,
wire the mic configuration header for the Elecraft mics, and then change
the
wiring at the mic
Folks,
My advice on mic wiring - unless you must use the mics with multiple rigs,
wire the mic configuration header for the Elecraft mics, and then change the
wiring at the mic plug to match the Elecraft configuration.
By doing that, it certainly simplifies things a whole lot. I see no sense
in
4 matches
Mail list logo
