n solve this.
73,
Gary, KI4GGX
K2 #4067
-Original Message-
From: David A. Belsley [mailto:[EMAIL PROTECTED]
Sent: Sunday 17 April 2005 1125
To: Gary Hvizdak
Cc: Elecraft Reflector
Subject: Re: [Elecraft] KSB2 firmware
The KSB2 firmware revision can be obtained by first setting the SSBA
menu e
In a message dated 17/04/05 16:25:51 GMT Daylight Time, [EMAIL PROTECTED]
writes:
Well, I had never read this procedure before, so I gave it a try. SSBA
entry to BAL, then held VOX and got . . . nothing.
Reply: --
Try activating BAL mode, go back
The KSB2 firmware revision can be obtained by first setting the SSBA
menu entry to BAL, then holding the VOX switch. (Return the SSBA menu
entry to its normal setting after checking the firmware revision.)
Well, I had never read this procedure before, so I gave it a try. SSBA
entry to BAL, th
, 2005 9:19 AM
Subject: RE: [Elecraft] KSB2 firmware
Brent Wrote...
I am in the process of building my new KPA100. I need to determine
The KSB2 firmware revision. Is there a way to do that? Looking at the
___
Elecraft mailing list
Post to: Elecra
Brent Wrote...
I am in the process of building my new KPA100. I need to determine
The KSB2 firmware revision. Is there a way to do that? Looking at the
little sticker on the chip, it reads 104. I have my doubts about that
being the firmware revision. I need to have revision 1.06 or later.
Bre
5 matches
Mail list logo