: [Elecraft] Mini-modules: BL1 vs BL2 dimensions
I don't have a BL2 on hand, but the BL1 pc board is 1.5 x 3 inches.
Ron AC7AC
-Original Message-
Does anyone know if the PCB dimensions for the BL1 BL2 are the same? I
had a customer needing an enclosure for his BL1 and asked me if it would
fit
@mailman.qth.net
Sent: Sunday, November 02, 2008 6:19 PM
Subject: RE: [Elecraft] Mini-modules: BL1 vs BL2 dimensions
I don't have a BL2 on hand, but the BL1 pc board is 1.5 x 3 inches.
Ron AC7AC
-Original Message-
Does anyone know if the PCB dimensions for the BL1 BL2 are the same? I
had
I don't have a BL2 on hand, but the BL1 pc board is 1.5 x 3 inches.
Ron AC7AC
-Original Message-
Does anyone know if the PCB dimensions for the BL1 BL2 are the same? I
had a customer needing an enclosure for his BL1 and asked me if it would
fit in my BL2 enclosure. I looked at the
I have the noise generator, dummy load and signal generator. All are
extremely useful and I really suggest having them. Of course, none of
them (except a dummy load) are needed when building the kit, but they
sure make it a lot easier.
On 2/7/07, Dennis Vavra [EMAIL PROTECTED] wrote:
Hey
Dennis,
If you do not have a good dummy load, I suggest the DL1 as a first priority.
Follow that with the N-Gen to use when aligning your filters using
Spectrogram, and then the XG1 or XG2 to give you a good reference point for
setting the S-9 point on your S-meter. If you are into SSB and want
5 matches
Mail list logo