What is the value of R30? If you change out this 22 ohm resistor with a 33 ohm resistor you should see an increase in power out. Mine also had low power TX but after this mod it is up to where it should be. Check out the archives from this reflector on low power on the kx1 for more discussion on this issue.
73 Aaron KC7RSO KX1 SN# 1037 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert Conley Sent: Thursday, March 31, 2005 9:37 PM To: [EMAIL PROTECTED] List Subject: [Elecraft] re:sick kx1 1069 Dave Anderson, K4SV wrote: >Hi All, > >In testing the transmitter it too worked but here is >my problem. With a 12 volt external power supply I am >only able to get 2.5 watts out on 40 and almost 2 on >20 meters. No, the power does not sag. > > I also had low power on KX1 #1056 pretty much the same levels as yours . It was suggested that I compress the windings on "L2" to about 70% of the core coverage instead of the 90% that is used. When this was completed my power came up to about 3 1/2 watts but YMMV de "rc" kc5wa _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com