No Wayne, thank you!
wayne burdick wrote:
>
> Now on my list--
>
> tnx
> Wayne
> N6KR
>
> On May 15, 2009, at 6:54 PM, drewko wrote:
>
>> Try the following.
>>
>> Assuming all your ham bands are mapped "IN", except 5.0 MHz:
>>
>> Starting somewhere on the 40m CW band...
>> FREQ-ENT 5.990
Now on my list--
tnx
Wayne
N6KR
On May 15, 2009, at 6:54 PM, drewko wrote:
> Try the following.
>
> Assuming all your ham bands are mapped "IN", except 5.0 MHz:
>
> Starting somewhere on the 40m CW band...
> FREQ-ENT 5.990 ENTER
> Move VFO to somewhere above 6.000
> BAND-UP
>
> You end up on
> Good job, Drew! I repeated your steps and confirm the same result:
> 40m is mapped out. Now that it's repeatable it can be fixed. (BTW,
> I'm running FW 3.11)
Same here on FW 3.14
73,
Gary ZL2iFB
__
Elecraft mailing list
Home:
Good job, Drew! I repeated your steps and confirm the same result:
40m is mapped out. Now that it's repeatable it can be fixed. (BTW,
I'm running FW 3.11)
73
--
Joe KB8AP
On May 15, 2009, at 6:54 PM, drewko wrote:
> Try the following.
>
> Assuming all your ham bands are mapped "IN", exc
Try the following.
Assuming all your ham bands are mapped "IN", except 5.0 MHz:
Starting somewhere on the 40m CW band...
FREQ-ENT 5.990 ENTER
Move VFO to somewhere above 6.000
BAND-UP
You end up on 30m (not in the 40m ham band as you would expect).
Go to CONFIG BND MAP and use BAND-DOWN
I don't use rig control software. I do use ACLog to log and downloaded and
starting using K3_EZ the other day and that may be what caused the problem.
At least now I know what is happening and can resolve any future problems.
73, Bill, NZ0T
I tune out of band on a regular basis for SWLing and
I tune out of band on a regular basis for SWLing and have no
such problem. If you're using rig control software, I suggest
you look in that area.
73, Mac, KR0I
**An Excellent Credit Score is 750. See Yours in Just 2 Easy
Steps!
(http://pr.atwola.com/promoclk/100126575x1221823239x1
I've rediscovered the pleasures of SWLing again and have spent much time
snooping around the bands, particularly the broadcast bands.
There have been no band mapping problems here and no rig control software is in
use as I'm into DIY HI!
But seriously, no problems at all encountered on v3.14 at
ressed at a firmware update.
>
> David
> G3UNA
>
>
> Subject: Re: [Elecraft] [K3] Help! Wierd bandswitching problem.
>
>
>
>> Be aware that roaming outside of the ham bands can cause them to get
>> mapped out. Then you have to go back into Config Band Map to re
That should not happen, that's not user-friendly at all. I trust this will
be addressed at a firmware update.
David
G3UNA
Subject: Re: [Elecraft] [K3] Help! Wierd bandswitching problem.
> Be aware that roaming outside of the ham bands can cause them to get
> mapped out. Then you
X 727-937-8834
NASFT 30210
K3 #1605
CCA 98 00827
W9DVM
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of drewko
Sent: Friday, May 15, 2009 2:31 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Help!
Be aware that roaming outside of the ham bands can cause them to get
mapped out. Then you have to go back into Config Band Map to reset
them to "IN". This happens to me frequently.
73,
Drew
AF2Z
On Thu, 14 May 2009 18:56:53 -0700 (PDT), Bill NZ0T wrote:
>
>All of a sudden tonight I can't get t
Thanks Joe! That was it.
Joe Planisky wrote:
>
> Hi Bill,
>
> Yes, a similar thing has happened to me several times. Sometimes
> after a FW upgrade, and sometimes just out of the blue. Check the
> band map (CONFIG: BND MAP). With the BND MAP entry up, cycle through
> the bands with t
Hi Bill,
Yes, a similar thing has happened to me several times. Sometimes
after a FW upgrade, and sometimes just out of the blue. Check the
band map (CONFIG: BND MAP). With the BND MAP entry up, cycle through
the bands with the band switch button and see if 1.8, 3.5, and 10.0
got set to
14 matches
Mail list logo
