It's easier with a tuner that has lossy components. It's really easy with a tee
tuner with three adjustable components. There are many matching solutions, only
one of them is the lowest loss.
On 4/2/2017 2:12 PM, Don Wilhelm wrote:
Phil,
It is indeed possible to match a very high SWR or even
.
73, Ron AC7AC
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Sunday, April 2, 2017 2:12 PM
To: Phil Hystad; Elecraft Reflector
Subject: Re: [Elecraft] KAT500 tuning behavior when the load is impossible
to match ?
Phil,
It is i
Phil,
It is indeed possible to match a very high SWR or even an open circuit
or a short.
That will be more probable on the higher frequency bands than on the
lower bands.
73,
Don W3FPR
On 4/2/2017 12:42 PM, Phil Hystad wrote:
I got my second KAT500 tuner to use with my new backup rig and whi
Your story reminds me of a scene from that Godzilla movie with Matthew
Broderick where he is “pumping” over sized worms from the ground using
electricity.
73, phil, K7PEH
> On Apr 2, 2017, at 10:05 AM, Mike Rhodes wrote:
>
> No practical experience with the KAT500 but can tell you that, year
No practical experience with the KAT500 but can tell you that, years
ago, while guest operation at a contest station, a 160 meter vertical
was strung up between a couple of the towers. The operator went in and
successfully tuned the antenna to a 1:1 match and then loaded the KW amp
to full outp
5 matches
Mail list logo
