This patch adds a pin to motion that allows rapids to be overridden
from 0 to 100 percent.
connecting this pin to halui.feed-override.value makes GUI's feed override
also control rapids.
This patch does not add an NML command to control rapid override,
That is beyond my skill and I'm not sure nece
Thanks Peter
I made your suggestion and Axis start without error but when I try to move the
axis nothing happen the motor don't move
If I turn the motor shaft i see the value changing in the axis and put an error
so the encoder signal work
did you have a stepmotor closed loop config to compare
On Thu, 5 Jun 2014, ELHIMA Moustapha wrote:
Date: Thu, 5 Jun 2014 01:47:43 -0700 (PDT)
From: ELHIMA Moustapha
To: "emc-us...@lists.sourceforge.net" ,
emc2
Subject: [Emc-users] Step motor in closed loop
Dear All,
I'm back to get some help, I've tried to use my 2 phases 1.8° 12Nm stepmot
On Thu, Jun 05, 2014 at 01:47:43AM -0700, ELHIMA Moustapha wrote:
>
>
> Dear All,
>
> I'm back to get some help
Hi, please ask for setup/configuration help on the emc-users list or
the forum; we like to keep the emc-developers list for discussion of
development and related topics.
Thanks,
Chri
Dear All,
I'm back to get some help, I've tried to use my 2 phases 1.8° 12Nm stepmotor in
closed loop on linuxcnc
I have connected 600 lines encoder to get the feedback for my stone
lathe. This encoder is connected directly to the back of the motor
My driver is a leadshine MD2278 with a select
