Hello Everyone, I know this has been bouncing around for quite some time, and from reading back thru a lot of postings and even a feature request (#68) , I haven't seen anything or heard anything in the last couple of months regarding Jog while Program Paused. I was just wondering if this is something that can be revisited to try to get it made available in master for testing. I do know that it is available thru the machinekit project, and see through postings an that forum, that it still needs some testing but looks to be pretty much ready to rock and roll.
I have tried to go down that road in regards to getting just my test pc configured to run that, and have issues every time I try. Issues not relating to the software, but to my lack of knowledge on setting up and programing from different repo's and software versions, ( I'm going on 2 and a half years using Linuxcnc, and just in the last 3 weeks was able to efficiently build/run/update/reproduce on the stable 2.6 branch and not master). I also know that at times it probably looks as though that we are always asking for things and maybe not helping out enough, but we are willing to test anything thrown out there and report back with as much info as possibly available. We now have all three of our turning centers running everyday 8-10 hr shifts, and have not had a single issue regarding tools not found in the tool table, Linuxcnc slowing down, pc's freezing up, and all the other crazy things I have had happen in the recent history. Today I am actually going to start the tear down and rewire/retrofit of a 3 axis Cincinnati Milacron vertical machining center to Linuxcnc and add a 4th axis while doing it. That still leaves 2 more machining centers and 1 turning center for sure that are now going to get Linuxcnc put on them. Also, I would like to thank Chris Morley for finding the problem regarding the way the tool table and Gscreen/Gmoccapy communicate with each other. Apparently data was not going back and forth at the right times, if at all, and it was causing repetitive issues of us getting faults regarding "Tool XX not found in Tool Table". I think we have the perfect combination of GUI and tool wear offset option, that exploited this problem. He was able diagnose the problem and made some mods to the gladevcp/tool table editor configs on 9/15 that cleared up those issues, since then we have not had one single issue of a tool not found in the tool table. Hopefully not too long winded, but I figured I would throw it out there since the fest is just around the corner, and I would hope that maybe this could be talked about amongst all you guys while there. Thanks Rick Superior Roll & Turning 399 East Center Street Petersburg MI, 49270 734-279-1831 www.superiorroll.com ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
