On 14 January 2014 08:06, Chris Morley wrote:
> air cut and check if offsets are set at-all/same for tool 2 each toolchange
> could be the offset wasn't turned on the first time ??
No, there is a G43 for the first load of Tool 2 too.
> Is he using any lathe patches ?
He says not, but is doing
> From: bodge...@gmail.com
> Date: Mon, 13 Jan 2014 13:37:16 +
> To: emc-developers@lists.sourceforge.net
> Subject: [Emc-developers] Nicely set up HXL
>
> http://youtu.be/nOPW4-WRRMs
>
> The chap is having some problems with tool offsets, however.
> He is
http://youtu.be/nOPW4-WRRMs
The chap is having some problems with tool offsets, however.
He is using Gscreen, and I am not entirely sure how the offsets work
in that, however the problem description seems GUI-agnostic:
"Rough the shank down to 3.6mm with tool 2 and then cut the groove
with tool 1
