yay - will test
thanks!
sam
On 06/11/2014 10:35 AM, Robert Ellenberg wrote:
> Hi sam,
>
> I'm honestly not surprised about the increased vibrations, since we're
> doing infinite-jerk planning here, but I'm glad to hear it's sped things up
> at least.
>
> I just pushed a small fix to the circular-b
Hi sam,
I'm honestly not surprised about the increased vibrations, since we're
doing infinite-jerk planning here, but I'm glad to hear it's sped things up
at least.
I just pushed a small fix to the circular-blend-arc-rc4 branch. It seems to
work in simulation for a G33 move (position sync).
-Rob
Great!
Running the current TP on the K&T with its current acceleration settings
was pretty 'tame'
With the new TP - you could feel it in the floor.. Part of it was the Z
axis has about .0003" backlash - so an audible 'thud' could be heard at
stops/reversals..
Great work..
sam
On 6/8/201
Good find! I bet that bug was introduced during the overhaul of max speed
and feed to get smoother performance with arcs. The good news is, if what I
think is wrong actually is, it's a simple fix (just to make sure that if
we're doing synced motion, to ignore the F-word). I'll poke around in the
mo
Here is a cell phone picture of the new TP cutting jmk's fusee program.
(this is how the problem was found...)
after setting the F word before the spindle synced motion to something
very high (like F9) it cut correctly. (with F6 within the program -
the motion would fall behind as it need
