Alexandru,
The declaration of incorporation is a document specific to the machinery
directive (Annex IIb) and doesn't apply to the EMC, LVD, or other directives.
The EMC Directive does not apply in this case since, as you pointed out, the
product in question has not been taken into service. T
Disposition 1009/98 requires that all electrical products under 50V comply
with the requirements of Resolution 92/98 effective 18 August 1999. A
Declaration of Conformity will be required for the first year after which
the second phase (test certificate) of Resolution 92/98 will be effective.
Fo
We are about to trial a protype unit that has a user interface of about 36 keys
in 6 by 6 matrix. We are considering replacing the individual keys with a
single moulded rubber keypad.
What flammibility should we be looking to use. (The unit is outside of a fire
enclosure, is 24 volts and the po
Here's another Usenet ad for a shielded enclosure filter.
Usual disclaimers.
Contact the seller directly.
List-Post: emc-pstc@listserv.ieee.org
Date: Sat, 18 Sep 1999 12:33:38 -0700
From: wor78...@snowhill.com
Newsgroups: misc.industry.electronics.marketplace,rec.radio.swap
Subject: FS: 2 x 50 a
Argentina's resolution 92/98 is now in its second phase of application, and
since 18 September all products powered from more than 50V now need either
formal safety certification (eg by IRAM) or an approved Argentine conformity
mark before they can be imported into Argentina.
Certification can
Forwarding for Richard Worley. Jim
Reply Separator
Subject:EMC Consultant
Author: richard_wor...@dell.com
List-Post: emc-pstc@listserv.ieee.org
Date: 09/21/99 5:57 PM
I'm searching for an EMC Consultant to provide a training class for
mechanic
Hi Dan:
According to both IEC 384 and UL 1414, Y capacitors are rated
up to 250 V rms, not higher.
However, RIFA offers ac capacitors in their Y capacitor
catalog pages rated up to 440 V and 500 V rms (without
certifications). If you were to use one of these in a
certified product, then yo
On a single phase power supply that has 480VAC on the input, what type of
"Y" Cap would be acceptable for use from Line and Neutral to ground?
Browsing through several catalogs, I have only seen them rated up to
250VAC.
Does anyone know of a Y cap that can be used in this situation, or will I
hav
8 matches
Mail list logo
