Not a legalese answer but a technical consideration. RE are measured only
above 30 MHz due to measurement accuracy concerns at lower frequencies. The
CE limit, in addition to preserving power quality in radio frequency bands,
also limits RE from long power lines. So there is a good technical
Robert,
Yes of course! e.g. For entered 1 minute, timer expects 60, (3600 cycles),
Second Ticks but on 50 Hz power receives only 50. Therefore cooks for
another 10 ticks which takes 1/5 minute longer.
Thank you for the correction.
Tony,
--Reply
I would like to express my thanks to all of you who provided me with
valuable information on this topic. I now have a good understanding of the
possible risks associated with such an endeavor.
Regards, Ravinder
Email: ajm...@us.ibm.com
Ron, my understanding is that if these products were placed in distribution
- e.g., not under your control - they can remain there for a virtually
unlimited time until sold as is. However, if the products are still in a
warehouse under your control, then you have two options:
1. Ensure that
Hello all,
Is there any new requirement on doing conducted emissions testing on
distributed DC inside a building.
RE: EN 55022:1998
The DC comes from an AC - DC supply (compliant).
Would there be a cable length above which the conducted test must be done?
I know some immunity tests are required
Hello to all,
This is directed to all the EMC Directive experts on this list. I need your
help.
It has just come to my knowledge that a sizable quantity lot of finshed ITE
products have been built
and being stored in a warehouse. These products, facing obsolesence, are 100%
compliant with
Thanks to everyone that responded. A critical clue was to look at the plugs
separate from the power cords, and work backwards. I think I can figure it
out.
Again many thanks to those who took the time to respond. I appreciate it.
Gary
-Original Message-
From: Allan, James
On second thought, to be a little clearer, the CB scheme may have nothing to do
with this, but the scope of the question includes references to voltage ranges,
voltage surges, dips and interrupts, ripple and anything that may be a
requirement specific to Japan?
-Original Message-
When in doubt try http://www.panelcomponents.com/guide.htm I have to admit
that it is confusing with the US plug specified for 220 volt applications.
Jim Allan
Manager, Engineering Services
Milgo Solutions LLC
1619 N Harrison Parkway
Sunrise, FL, 33323
E-mail james_al...@milgo.com
Phone (954)
Can someone direct me to the reference's) that would lead me to a description
of the Japanese voltage requirements for safety in CB Scheme.
Michael S. Davis
Compliance Engineer
ADC BATG Compliance Engineering
Tel: 203 630-5788
Fax: 203 630-5762
mike_da...@adc.com
Learn about
Gary,
The best specifications that I have found are:
* South Korea 220V +/-10%, 60Hz +/-4%.
* North Korea 220V +6.8% -13.6%, 60Hz +0.0% -5.0%.
We use linecords with Schuko (CEE7 VII) plugs for both countries.
South Korea changed from a 110V 60Hz standard a few years ago. For several
years
Gary
Did you try www.interpower.com
?
Graham Kilshaw
rbitem.com
-Original Message-
From: Gary McInturff [mailto:gary.mcintu...@worldwidepackets.com]
Sent: Tuesday, May 15, 2001 12:02 PM
To: EMC-PSTC (E-mail)
Subject: Korean Power Cord ??
Looked at a couple of vendor
Thank you for your reply, Paul. I visited the CCEE web site and found the
catalogs of products that required safety certification. However, something
is not clear to me. In the second catalog, OFF (office) equipment is listed,
then in the next column several types of equipment are listed and
FAQ: Sources of EMC Safety Compliance Information
This is to let you know that I have just posted in two parts the 61st
issue of the above FAQ to the newsgroup for regulatory/compliance matters
and EMC and safety specifications and testing,
Looked at a couple of vendor sites and don't see any guidance and
our distributor isn't a whole lot of help. Anybody have a suggestion?
Gary
---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc
I would think the clock timing and microprocessor timing would suffer and as
a result it may deliver heat but programming prarameters could be
drastically incorrect.
For short periods of time the heating effects would be minimal but who knows
what a safe time period would be. Better to have
You have to follow GB 9254:1998 which is identical to CISPR 22:1997, and look
for lab that is accrediated by CNACL (China National Accreditation Committe for
Laboratories).
wo...@sensormatic.com 05/15/01 12:05am
I am aware of China's requirements for safety and EMC approvals for imported
Hi Richard,
There are currently 2 national mark for China for electrical consumer
products, CIQ and CCEE. CIQ is for importing requirement to China. It has a
list of compulsory product list that must certify for product safety, out of
it there are several items such as printer, monitor, AV
Dear Colleagues,
I appreciate if you could help me with my problem please. We use PC power
supply in our control machine for feeding our motherboard. The end product is
intended for EU. I am unable to locate a PC power supply with PFC and all the
vendors that I have approached say to me it is
This is a micro-wave right? This could explain why my wife burns my eats!
(Please don't call her I have enough grief already)
Gary
-Original Message-
From: Price, Ed [mailto:ed.pr...@cubic.com]
Sent: Monday, May 14, 2001 1:57 PM
To: emc-p...@ieee.org
Subject: RE: 120V appliance on 240V
20 matches
Mail list logo