Sylvia and good people,
1) SASO approval is not required; however, all equipment entering Saudi Arabia
need a CoC (Certificate of Compliance) and a Pre-Shipment Inspection. A CoC is
required for each shipment made into Saudi Arabia.
New Regulations applied in the Kingdom of Saudi Arabia
1
This is a multi-part message in MIME format.
IEC 61010-1 Annex A.3 has a test circuit for measuring accessible current at
high frequencies. This is the circuit model for the leakage test resulting in
RF burns. It is originally derived from IEC 2745/2000.
If your question is more general, you c
Bob,
One method used for exposure monitoring is placing a large enough current
probe over an ankle. You may consider placing it over a wrist or even a
finger, depending on what you are tying to measure. That would give you
current. The mehod is limited at the low frequency end by the current pr
All,
NOTE – Location Change For The April 26 NPSS Meeting
Location:
BioDefense Corporation
128 Spring Street
Lexington, MA 02062
Contact is Tony Nikolassy at (781) 861-8810 X222
There will be a Northeast Product Safety Society meeting tomorrow
Wednesday, April 26th, at BioDefense Corporation at
In message
,
dated Tue, 25 Apr 2006, rehel...@mmm.com writes
>My question is: Does any one know of a human body network or circuit
>that goes higher in frequency or know of a measuring
>technique/procedure for higher frequency contact currents? I am
>particularly interested in measuring contac
I have been reading EN 60990 (Methods of measurement of touch current and
protective conductor current). The text calls out a simple human body
measuring network that consists of a resistor (1500 ohms) in parallel with
a capacitor (0.22 uF) which are in series with another resistor (500 ohms).
The
6 matches
Mail list logo