In or out of the notches? I'll agree that outside the notches there is no
question when a BPL system is operating. BPL is being proposed by some as one
of the command/control link methods for the Smartgrid. The EMC Society is
pushing the folks working on IEEE P2030 to consider EMC as an important
In message
<4c5e6457cd7911469a07260381288c286f6df...@orsmsx502.amr.corp.intel.com>,
"Pettit, Ghery" writes
>It should be noted that the current level of notching provides an
>adequate level of protection to services in the notches. This has been
>shown by experience in the field.
It hasn't
wow, someone is HAMgry. Apology (when became available) would be accepted.
Lesson learned: "don't touch the man's ham". As I mentioned before, as long as
I can use your services in case of emergency, I will be "ham's the word" or is
it hum or mum, can't quite remember. I hope the emc-pstc people wi
Aren't the hams the ones that talk around the world one one watt, or is it
five watt radios?
So in a disaster, please bring a hand full of batteries, if you want to talk
to someone over a ham radio. That someone would be advised to live not in an
area of BPL/PLC as the intentional received ham sig
Dear Colleagues and Friends,
IEEE Product Safety Engineering Society Santa Clara Valley Chapter
Meeting Date: Tuesday, May 25, 2010
Dinner: 5:30 – 6:45 p.m. Socialize with your colleagues and tonight’s
speakers at: El Torito Mexican Restaurant, 2950 Lakeside Drive, Santa Clara,
CA 95054 (408
Luke:
I once set up a test station where I had to test the performance of microwave
waveguide filters, and I despaired about all the screwdriver work that would
be involved (this was in the pre-electric screwdriver days). The waveguide was
WR-90 (X-band), but the technique is general. I just fishe
KI4GPG here agreeing with you 100% it is refreshing to see people standing up
and setting the record straight for Hams. I feel your pain!! You were a
little strong with your statements but it had to be done!!
Regards,
Patrick Grande
Environmental Stress Screening Lab
GE Aviation
Digital S
It should be noted that the current level of notching provides an adequate
level of protection to services in the notches. This has been shown by
experience in the field. And, the IEEE EMC Society believes that EMC
considerations are critical to the success of PLC and Smartgrid technologies.
Hello group,
Does anybody have a recommendation for types / suppliers of quick release
waveguide clamps?
Thanks,
Luke Turnbull
Conekt is a trading division of TRW Limited
Registered in England, No. 872948
Registered Office Address: Stratford Road, Solihull B90 4AX
-
This message is f
All,
You are invited to the Northeast Product Safety Society’s 22nd annual
membership dinner meeting on Wednesday, May 26th, at the Holiday Inn,
Boxborough MA featuring Dave Burns, Product Safety Investigator with the
Consumer Product Safety Commission. Dave Burns will discuss the US
Consumer Pro
Hi all,
A costumer would like to include his own built ZigBee module (2.4 GHz) in his
appliance, and sell it in the US.
As far as I can see from FCC 47 CFR part 15 the ZigBee module needs a
certification and a FCC ID, based on measurement of the radiated radio
frequency energy. Must these meas
Dear experts,
One of our product(RF device) will be sold to US, we need to apply FCC
ID for it.
This product has its own enclousre, can be used as an end-product,
also, it can be installed into another product, as RF modular.
So which kind of FCC grant should we apply? modular FCC grant or
non-m
Hello All
Those interested in the Environmental effects of PLT/BPL/PLC may find this
interesting.
Environmental Effects of the widespread deployment of high speed Power Line
Communication-
Cumulative Effects on Signal/Noise ratio for Radio Systems
By Richard Marshall, MA, CEng., FIEE,
13 matches
Mail list logo
