SCPI - no. The command set is given in the manual but appears to be
proprietary.
When asked if TILE has a driver for it, the answer is yes, but probably only
in the latest version of TILE.
The PMM9010 comes standard with USB and RS232 ports for connecting to a PC,
but a GPIB port is optional.
All,
it was my pleasure to represent the IEEE PSES today with a presentation
“Product Compliance Trends in Europe for Consumer Electronics” during the
1st IEEE international conference on consumer electronics here in Berlin.
http://www.icce-berlin.org/
Best regards
Dipl.-Ing. Mich
Thanks for review info, Bob. SCPI command set available?
Brian
-Original Message-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Bob Richards
Sent: Thursday, September 08, 2011 8:02 AM
To: emc-p...@ieee.org
Subject: CISPR 14 "clicks" test analyzer - revisited
Ok, I finall
Ok, I finally had a chance to see a demo and to evaluate the PMM9010 with the
clicks option.
First off, the PMM9010 with the clicks option is not very expensive, about
half the cost of the R&S solution. If clicks measurements (and C16 compliant
conducted emissions up to 30MHz) are the ONLY crite
Group
Client have RF Short Range Device (78 GHz (Tank) Level Probing Radar) which is
compliant with:
· FCC Part 15C
· EN 302 372 (TLPR, closed tank)
· EN 302 729 (LPR, open tank) via NB opinion
This frequency range/application is quite new and whilst the client has in
c
Any opinions on Anritsu equipment concerning reliability, quality, support,
etc.
Much appreciated,
Bob Heller
St. Paul, MN 55107-1208
Tel: 651-778-6336
Fax: 651-778-6252
-
This message is from the IEEE Product Safety Engineering So
6 matches
Mail list logo