Good evening, A Boulder company is looking to replace their EMC-compliance
design consultant sometime by the end of the year.This would be part time
consulting. Please reach out to me or call with questions, and I can forward
any interested parties. The company is Radiometrics. Colorado Brian(
Hi The Other Brian:
“Company-A's name and address is on the Nameplate Label on the back of the
Widget. Company-A handles everything including the Conformity Assessment,
Generating the EU-DoC, Applying the CE marking, audits, inspections, etc..”
All of the other markings and stuff ar
Brian —
I call this “private labeling.”
The EU and presumably the customer want a match between the company name on the
product and company name on the declaration, hence the expectation that they be
the same.
The Blue Guide often has additional detailed guidance on things like this.
Mike Sherman
I'm not a Marketing person, so I do not know the official term for it, but
there is a method of doing business where one company buy/sells a product
made by another company marked with the brand name and trademark of the
marketing company. I've always called this "Branding", but like I said it
may
Bill,
If I remember correctly, the OP’s question had to do with unintentional
radiators. Your table below has limits for intentional radiators.
Ghery S. Pettit, iNCE
Pettit EMC Consulting LLC
From: Bill Owsley <00f5a03f18eb-dmarc-requ...@ieee.org>
Sent: Thursday, August 15, 2019
Nicely done,
Thank you! Doug
Douglas E Powell
Laporte, Colorado USA
doug...@gmail.com
http://www.linkedin.com/in/dougp01
On Thu, Aug 15, 2019 at 10:21 AM Ken Wyatt wrote:
> Hi Group,
>
> I recently published an article on evaluating the insertion loss of
> various absorber sheets. So many m
radiated emissions go a bit lower.
§15.209 Radiated emission limits; general requirements.
(a) Except as provided elsewhere in this subpart, the emissions from an
intentional radiator shall not exceed the field strength levels specified in
the following table:
| Frequency (MHz) | Field stre
Hi Group,
I recently published an article on evaluating the insertion loss of various
absorber sheets. So many manufacturers specify the permeability of these, but
for an EMC engineer, we want to know the absorption or insertion loss. Here are
measurements of five manufacturers.
https://www.ed
8 matches
Mail list logo