I'm not sure, but I believe the orange outlets mean that the outlet is
protected with backup power, e.g., a generator, in case of lost power from the
grid. I've seen these in hospitals. I don't know if it's in the NEC or not.
Anyone?
Regards,
John Kretsch
-Original Message-
From: An
Does anyone in the collective know about _where_ Bellcore spells out any sort
of redundancy requirements.
There is a buzz about "L-10" requirements and I'm not sure where this comes
from.
TIA.
Regards,
John Kretsch
---
This message is from the IEEE EMC
I'm looking to take the NARTE ESD exam.
Has anyone on this board had experience with it?
Any recommended books or other reference material?
Thanks In Advance.
---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discuss
I thought I would try to contact the collective on this one...
We have a shelf system that is failing GR-63 hygro dust with excessive bit
errors (unit did pass Gaseous contaminants no problem). Air is filtered.
Anyone have experiences that they would like to share (non-proprietary of
course) abou
We have a product which is a 2.4GHz (ISM band) spread spectrum frequency
hopping transceiver. It currently has FCC certification. I am not familiar
with Japanese compliance with intentional radiators.
What type of compliance is needed in Japan for this type of product?
TIA.
John Kretsch
---
Hey Folks:
Here's an article about cell phone manufacturers providing SAR info right on
the boxes.
But, what's interesting, they don't have to put the data on the box, just how
to get it from the FCC.
http://news.excite.com/news/ap/000717/18/cell-phone-radiation
Regards,
John R. Kretsch, P.E.
Just to add a little to this...
Make sure UL1950 is 3d edition...
And I don't believe Clause 6 applies since you don't direct to the PSTN.
Thus, no FCC Part 68 either.
Don't forget about EN 55 022 and EN 55 024 if you're selling in the EU.
Check with the lab that you'll use for testing for more
Anybody have any decent solutions to passing GR-63 needle flame with regards to
fiber service loops and their associated connector boots? This has to be a
common problem.
Regards,
John R. Kretsch, P.E., N.C.E.
Manager, Design Assurance Engineering
ADC Broadband Communications
john_kret...@adc
I had to throw this in here .
This came from a friend of mine...the source I do not know.
Remember, this is a joke :)
Let's just make sure we don't all start speaking "New-Speak" a la 1984.
The European Union commissioners have announced that agreement has been reached
to adopt English
as
Are there any decent FAQs anywhere that discusses these types of issues?
TIA.
Regards,
John R. Kretsch, P.E., N.C.E.
Manager, Design Assurance Engineering
ADC Broadband Communications
john_kret...@adc.com
-
This message is coming from the emc-pstc discussion list.
To cancel your subsc
Can anyone point me to a source regarding the clarity of the laser warning
label per CFR 1010?
I'm talking about things like size, fonts, etc.
We need to attach a pretty small label to the front of a product.
Regards,
John R. Kretsch, P.E.
Manager, Design Assurance Engineering
ADC Broadband C
Just out of curiosity, how come "assembled from FCC Class B compliant
components" seems to fly but CE + CE = CE obviously does not?
What am I missing here?
BTW, I don't have much faith taking a piece of equipment that has been
"assembled from FCC Class B compliant components" to a test lab and
Randy:
Lorie Nichols can be contacted at (978) 486-0888.
Also, you can try m...@conformity.com
http://www.conformity.com
Regards,
John R. Kretsch, P.E.
Compliance Engineering Supervisor
ADC Broadband Communications
john_kret...@adc.com
> -Original Message-
> From: randall.flind...@emul
Moshe:
We treat the 48V input as a secondary voltage with primary voltage
rules. Therefore, you will have to hold to the _reinforced_ distances
for creepage and clearance.
Regards,
John R. Kretsch, P.E.
Compliance Engineering Supervisor
ADC Broadband Communications
john_kret...@adc.com
-O
14 matches
Mail list logo