Re: CISPR 25 testing what antenna?

Hi Joakim, my opinion: These issues should be addressed in the EMC test plan which requires sign-off of the company you are supplying the report to. Good Luck, Kurt Fischer - Original Message - From: "Gäfvert Joakim" To: Sent: Tuesday, August 12, 2003 6:58 AM Subject

RE: NARTE safety engineer certification

Hi Scott and all, The web site is reputable and the organization is run by Greg Kervill who may be on vacation / travel and not responding to the emails right now. Whomever is interested in this program I suggest you contact Greg and/or NARTE. Regards, Kurt From: Scott Barrows [mailto:sba

RE: FCC and Hi Temp operation

My recommendation is to look at the radio performance issues as well as the regulatory. It is possible that you have no FCC compliance issues but the radio does not perform! The FCC could not care less if your radio works or not. Kurt Kurt Fischer HYPER Corporation 1279 Quarry Lane, Suite

RE: Noise Factor

Hi Rich, The approach that I am going to suggest is not rigorous because in order to determine the NF of the system you would need to calculate the NF and Gains for each element in the measurement system I would work the problem this way: 1. Determine your receiver noise floor by setting the app

Question to list moderator

Hi, I was wondering if job availabilities can be posted on your email reflectors? If yes, I'll forward you one concerning a contract position in Florida for an EMC/Tempest engineer. Regards, Kurt Fischer This message is from the IEEE EMC Society Product Safety Technical Committee emc

RE: SAR Testing

Hi Andrew, Many of the test labs that perform SAR testing for cellular handsets would be able to perform this test. Bluetooth operates at 2.4 GHz so probably SAR labs that have capability for IEEE 802.11b,g and North American Cellular (1900 MHz) could help you. Please contact me offline if you s

RE: Need to Rent Test Equipment, Dallas Texas Area

need and then have it functionally checked or verified by a cal lab. I'm in CA so the info is at least 4 years old. Kurt Fischer From: peter merguerian [mailto:pmerguerian2...@yahoo.com] Sent: Wednesday, April 02, 2003 6:07 PM To: emc-p...@majordomo.ieee.org Subject: Need to Rent Test Equi

Importing Bluetooth product into Egypt and Saudi Arabia

Hello colleagues, I was wondering if anyone has any information on importing a Bluetooth portable product into Egypt and Saudi Arabia. Bluetooth is low-powered (less than +4 dBm)wireless technology. The device operates in the 2.4 GHz ISM band and uses FHSS technology. The product would already b

Bluetooth and WLAN products in France

Hello everyone, Do you know if the French Government has dropped the rf power output restrictions for Bluetooth? If not, do you know if they intend too? Thanks in advance for your help. Regards, Kurt __ Kurt Fischer BQB Hyper Corporation 1279 Quarry Lane, Ste. B

Real product interference source at 121 MHz

consumer products or perhaps some after market sattelite rec. retro-fit kit?? Has anyone else had this experience in the last year --- (the problem was not present 2 years ago)? It does appear to getting worse and is spreading geographically as well. Regards, Kurt Fischer Hyper Corp N,j^ AȞ

RE: capacitor filter inserts for electrical connectors

ied in the below article: http://www.devicelink.com/mpmn/archive/98/04/case.html Good luck. Kurt Fischer -Original Message- From: Pettit, Ghery [mailto:ghery.pet...@intel.com] Sent: Wednesday, December 04, 2002 4:34 PM To: 'Ken Javor'; emc-p...@majordomo.ieee.org Subject:

RE: ferrite tiles

Another source is Fair-rite Corporation in New York State (914.895.2055). _ Kurt B. Fischer International Compliance Corporation 802 N. Kealy Lewisville, TX 75057-3136 Voice: 972.436.9600 Fax:972.436.2667 e-mail: kfisc...@icomply.com web page: http://w

RE: OJ Review Service?

Please note new address and phone numbers. Thanks _ Kurt B. Fischer International Compliance Corporation 802 N. Kealy Lewisville, TX 75057-3136 Voice: 972.436.9600 Fax:972.436.2667 e-mail: kfisc...@icomply.com web page: http://www.icomply.com "these ar

Employment Opportunities near Dallas, TX - Product Safety Manager and Calibration/RF Technicians

EMPLOYMENT OPPORTUNITIES at International Compliance Corporation: Product Safety Manager International Compliance Corporation has an immediate opening for a Product Safety Manager. Selected applicant must be knowledgeable in UL/CSA/IEC/CE/LVD specifications. BSEE preferred. Salary commensurate w

FW: MRA press release

://www.icomply.com "these are my opinions not those of my employer" -Original Message- From: Jeffrey Horlick [SMTP:jeffrey.horl...@nist.gov] Sent: Wednesday, June 18, 1997 1:19 PM To: Kurt Fischer Subject:MRA press release Greetings Kurt, Please share this as approp

Argentinian Standards

Hi Treggers! Another source of information for South America is the BHS Central South American Guidebook less than USD $465. Regards, Kurt _ Kurt Fischer International Compliance Corporation 802 N. Kealy Lewisville, TX 75057-3136 voice: 972.436.9600 fax