Mike Sherman’s view exactly mirrors my experience in the 25 years I’ve been
doing EMC testing!
Regards,
Ian McBurney
Lead Compliance Engineer
Allen & Heath Ltd.
Kernick Industrial estate,
Penryn,
Cornwall. TR10 9LU. UK.
Tel: 01326 372070
Email: ian.mcbur...@allen-heath.com
From: MIKE SHERMAN
S
A question for the EMC experts.
Is there an alternative rf absorber to ferrite tiles that works between 30MHz
to 1GHz? I am thinking of the pyramidal type absorber.
This is for research for partially lining a pre compliance radiated rf emission
EMC room.
Many thanks in advance.
Ian McBurney
Le
nt.
Many thanks in advance.
Ian McBurney
Lead Compliance Engineer
Allen & Heath Ltd.
Kernick Industrial estate,
Penryn,
Cornwall. TR10 9LU. UK.
Tel: 01326 372070
Email: ian.mcbur...@allen-heath.com
From: Robert Bonsen
Sent: 24 September 2020 21:16
To: McBurney, Ian
Subject: Re: [PSES] Wifi
Dear colleagues.
I understand that this may not be the correct forum to discuss this issue but
I'm hoping someone may be able to answer my question or refer me to someone who
can.
We have a product with a built in Wi-Fi/Bluetooth module. For the USA, it is
not permitted for the user to be able
Ian McBurney
Lead Compliance Engineer
Allen & Heath Ltd.
Kernick Industrial estate,
Penryn,
Cornwall. TR10 9LU. UK.
Tel: 01326 372070
Email: ian.mcbur...@allen-heath.com
Allen & Heath Ltd is a registered business in England and Wales, Company
number: 4163451. Any views expressed in this email a
Hello Ted.
Many thanks for your reply.
I hope you are safe during the current pandemic.
Kind regards;
Ian
From: Ted Eckert
Sent: 07 May 2020 15:07
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: UL 60065 7th & 8th Edition
Hello Ian,
New products will not be eligible t
Dear Colleagues.
Does anyone know if products approved to the above standard will still be able
to be NRTL marked after 20th December 2020? This is the date the EN version can
no longer be used to declare conformity with the EU LVD. I would like to know
if the same event will happen in the USA,
Dear colleagues.
I would be interested in finding out how the hipot values (electric strength)
were derived as they have been increased in 62368-1.
Regards;
Ian McBurney
Lead Compliance Engineer
Allen & Heath Ltd.
Kernick Industrial estate,
Penryn,
Cornwall. TR10 9LU. UK.
Tel: 01326 372070
Emai
urney
Lead Compliance Engineer
Allen & Heath Ltd.
Kernick Industrial estate,
Penryn,
Cornwall. TR10 9LU. UK.
Tel: 01326 372070
Email: ian.mcbur...@allen-heath.com
From: Charlie Blackham
Sent: 04 February 2020 19:43
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: 62368-1 fire enclosure
Dear colleagues.
I have a question regarding the flammability rating of components located
within a fire enclosure.
We have been told by a safety approval engineer that under clause 6.4.6 of
62368-1:2014 that all combustible material within a fire enclosure and not part
of a PS2 or PS3 circuit
Dear Colleagues.
We have a product that can be powered from a PoE source as well as 12V DC.
For the EU EMC regulations, we measure the conducted rf emissions from the
ethernet port when supplied with PoE power. EN 55032 Table A.11
Is the same test required when declaring compliance with the FCC r
Hello Michael.
Am I right in believing that you can now affix the FCC logo to products when
using the sDoc scheme?
Kind regards;
Ian McBurney
Lead Compliance Engineer
Allen & Heath Ltd.
Kernick Industrial estate,
Penryn,
Cornwall. TR10 9LU. UK.
Tel: 01326 372070
Email: ian.mcbur...@allen-heath.
ineer
Allen & Heath Ltd.
Kernick Industrial estate,
Penryn,
Cornwall. TR10 9LU. UK.
Tel: 01326 372070
Email: ian.mcbur...@allen-heath.com
From: John Woodgate
Sent: 18 January 2019 15:39
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Spare parts requiring an EU declaration of C
Dear Colleagues.
Can anyone point me to the relevant section in the EU directives regarding the
shipping of spares into the EU?
We are shipping a spare PSU PCB assembly into Turkey and the Turkish customs
want a Declaration of Conformity document. I know Turkey is not in the EU but
they are dem
Dear Colleagues.
I have been waiting for some firm guidelines as to what will be the
requirements for UK manufacturers after 30th March 2019
but so far nothing has been published by the relevant authorities.
>From my understanding, if the UK leaves the EU without an agreement, the UK
>will be o
2018 09:28
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] EN 55032
Hi All,
The document below has been published very recently and shows how and why...
https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=COM:2018:764:FIN
In simple language, the EC court has decided that HS ar
solved any
time soon.
Best wishes
John Woodgate OOO-Own Opinions Only
J M Woodgate and Associates www.woodjohn.uk<http://www.woodjohn.uk>
Rayleigh, Essex UK
On 2018-11-26 09:45, McBurney, Ian wrote:
Dear colleagues.
Does anyone know if the 2015 edition of the above standard is now listed in
Dear colleagues.
Does anyone know if the 2015 edition of the above standard is now listed in the
OJEU for the EMC directive?
I am struggling to find it on the website.
Many thanks in advance.
Regards;
Ian McBurney
Lead Compliance Engineer
Allen & Heath Ltd.
Kernick Industrial estate,
Penryn,
C
that we meet the requirements of the relevant
directives.
Thank you all;
Ian McBurney
Lead Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
From: McBurney, Ian
Sent: 13 November 2018 09:2
Dear colleagues.
We are in the process of designing a USB bus powered audio product around 2.5W
for professional/consumer use.
The product enclosure will be UL94 5VA flammability rated plastic.
Will this product have to be NRTL approved for sale in the USA/Canada?
The EU LVD doesn't apply because
Dear colleagues.
With the introduction of edition 3 of IEC 62368-1, does anyone know when the
corresponding version of IEC 62368-2 will be available?
Many thanks in advance;
Ian McBurney
Lead Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 0
ut can be effectively attenuated with filtering.
Regards;
Ian McBurney
Lead Compliance Engineer.
Allen & Heath Ltd.
From: James Pawson (U3C)
Sent: 05 September 2018 09:17
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] RF immunity - audio noise in headsets
Hi Ian,
That&
Hello James.
We produce digital products with multiple analogue audio inputs and outputs and
have to include common mode filtering on every port to reduce the
susceptibility to radiated rf but also to attenuate the digital rf emissions
from within the product.
Ian McBurney
Lead Compliance Engi
on, until you get the source fixed, would be to use UPS on
battery.
with best regards,
Ari Honkala
From: McBurney, Ian [mailto:ian.mcbur...@allen-heath.com]
Sent: torstai 26. huhtikuuta 2018 13:33
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: [PSES] Mai
9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
From: John Allen [mailto:john_e_al...@blueyonder.co.uk]
Sent: 26 April 2018 13:43
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] Mains Conducted rf emissions measurements
Have you tried to isolate the original source of
4:12
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: Mains Conducted rf emissions measurements
Ian,
Does your screen room have massive line filters on the AC mains coming in?
This would be a requirement I believe.
Brian
From: McBurney, Ian [mailto:ian.mcbur...@allen-heath.com]
trum analyzer.
Check the AC Mains powering your analyzer. It might be the source of your
problem.
Hope you figure it out.
The Other Brian
From: McBurney, Ian [mailto:ian.mcbur...@allen-heath.com]
Sent: Thursday, April 26, 2018 6:33 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.I
Hello John.
I'm getting the LISN checked at a UKAS EMC facility next week. I think it's
excessive noise on the ac mains that's not being attenuated sufficiently by the
LISN.
Regards;
Ian
From: John Woodgate [mailto:j...@woodjohn.uk]
Sent: 26 April 2018 13:04
To: McBurney,
Dear Colleagues.
I am setting up a mains conducted rf emissions measuring system and am
experiencing excessive mains noise when connecting the LISN to the 240V wall
socket. The noise affects my measurements between 150kHz to 400KHz. Beyond that
and up to 30MHz I am satisfied. Is there a way of
Hello Brian.
My company is going through EAC certification at the moment but for medium
volume manufacturing.
>From my understanding there is 2 types of compliance.
TR CU Certificate of conformity and the TR CU Declaration of conformity.
Essentially, the Certificate of conformity is meant for hig
m
From: Boštjan Glavič [mailto:bostjan.gla...@siq.si]
Sent: 11 September 2017 09:58
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: EN 62368-1:2014 DoW
Hello Ian,
EN 60065:2014 has a DoW 17.11.2017. This is in two months.
For this standard CENELEC and OJ show the same DoW.
Best regards,
Hello Bostjan.
Do you know if EN 60065:2014 has the same withdrawal date as EN 60950?
Regards;
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
From: Boštjan Glavič [mailto:b
Hello Rich
I endorse Johns comments.
Regards;
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
From: John Allen [mailto:jral...@productsafetyinc.com]
Sent: 03 September 2017
Dear colleagues.
In EN 55032:2015 the definition of a wired network port (3.1.32) is for the
connection of voice, data and signalling transfers intended to interconnect
widely dispersed systems by direct connection to a single user or multi-user
communication network e.g. CATV, PSTN, ISDN, xDSL
Dear colleagues.
Many thanks to all those who replied to my query, in particular Bill Stumpf and
Michael Derby.
Always appreciated!
Regards;
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@a
Dear colleagues.
I am looking into labelling a product as Class A for FCC Part 15 emission
limits.
The product will use the verification route to compliance.
I would appreciate it if someone could let me know what labelling will be
required on the product and the text required in the user docum
Does anyone know where I can obtain or purchase a copy of this draft standard?
A source in the UK would be preferable.
Many thanks;
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.
Dear colleagues.
We are looking at purchasing a WLAN (Wi-Fi) router from China and include our
own wall wart power supply with it.
The router comes with all the necessary approvals and safety reports tested
with its own wall wart psu. However; are these documents still valid it we swap
the PSU
Dear colleagues.
With the change to the European Union LVD and the requirements regarding
declaring compliance, what version of EN 60950-1and its amendments are
acceptable and is there an expiry date?
Does the UL version have similar expiry dates?
Many thanks in advance.
Ian McBurney
Design &
Dear colleagues.
Is there an expiry date for declaring compliance with CAN/CSA-C22.2 No.
60065:16 2nd edition when manufacturers will then be required to use
CAN/CSA-C22.2 No. 62368-1-14?
Many thanks in advance.
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial
Hasn’t 55103-1:2009 been withdrawn and replaced by 55032:2012.
I believe professional audio products shipped after 2 march 2017 must use 55032
to declare compliance with the EU EMC directive.
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwal
ryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
From: John Woodgate [mailto:jmw1...@btinternet.com]
Sent: 18 October 2016 12:31
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] IEC 62368-1
There is such a document but it is an internal IEC TC108 HBSDT
Dear Colleagues.
I have been informed that China, Japan & Australia have not adopted IEC 62368-1
yet.
Does anyone know of a document or website where I can check to see which
countries have adopted the above standard?
I am having to test products to the above standard but with the national
devi
ceptable.."
Applicable to component p/s that is built into your box. N/A for wal-wart
without further test unless output rated LPS and/or Class 2.
6. The Klingon national version (K60065-0.1) disallows other than functional
insulation.
Brian
From: McBurney, Ian [mailto:ian.mcbu
Dear colleagues.
I have submitted a product for CB certification to IEC/EN/UL 60065.
The product is powered from a 12V dc wall wart purchased from an external
supplier. The power supply is fully CB approved to IEC/EN/UL 60950 and operated
well within its ratings.
I submitted the CB documentation
Dear colleagues
I am looking into purchasing a single phase 50/60Hz ac mains input filter for a
screened room.
However; I am not sure whether to purchase a 2 line multistage filter or a 3
line.
I'm assuming the filtering is only required on the live and neutral lines as
the earth should be bond
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
From: Adam Dixon [mailto:lanterna.viri...@gmail.com]
Sent: 19 May 2016 10:51
To: McBurney, Ian
Subject: Re: [PSES] Transformer insulati
Hello colleagues.
The switch mode transformers we use in our power supplies are specified by the
testing agency as insulation class A even though the materials used in the
transformer are all rated for 130°C operation.
We have asked the agency to up rate the transformer to insulation class B bu
Dear colleagues
With the implementation of the new EMC & LVD directives this month, does anyone
know where I can access the latest OJEU to check which standards are listed as
acceptable for declaring conformity with the new directives.
Many thanks in advance.
Ian McBurney
Design & Compliance E
Dear Colleagues.
I have an audio product that is Powered over Ethernet, has Bluetooth capability
and has various audio inputs and outputs. The product can be used in a
residential/consumer environment. I am very familiar with testing audio
products without wireless capability but this is the fi
Hello Rich.
Is the 108-606 DC document file available to all or is its access limited to
certain personnel only?
Regards;
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
Fr
E: ian.mcbur...@allen-heath.com
From: Richard Nute [mailto:ri...@ieee.org]
Sent: 05 January 2016 18:58
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] IEC 60950-1 PSU acceptance
Hi Ian:
Clause 7.2 only applies if the steady-state current exceeds 0.2 amps. Is this
the c
Dear Colleagues.
A happy new year to you all!
I have a problem with a well-known safety testing agency regarding an AC/DC
"wall wart" type adapter.
The adapter is fully approved to IEC/UL 60950-1 but in this case I am using it
to power a product that is being evaluated to IEC/UL 60065.
The age
Hello john;
I received your email today at 12:12 UK time.
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
-Original Message-
From: John Woodgate [mailto:jmw1...@btint
e following warning in the instructions for use,
to inform the
user of the risk of operating this equipment in a residential environment:
W arning: This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
Bill Stumpf - Lab / Te
Dear colleagues
In the 2015 edition of EN 55032 an interesting statement in clause 4.
"Equipment intended primarily for use in a residential environment shall meet
the class B limits. All other equipment shall comply with the Class A limits."
I am unable to locate a definition for residential en
es pretty close to this. Check it
out.
The Other Brian
From: McBurney, Ian [mailto:ian.mcbur...@allen-heath.com]
Sent: Friday, November 13, 2015 6:40 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] Rental costs for 1 day in shielded room
Hel
Hello Amund;
I'm a regular customer with a UKAS accredited UK EMC lab and pay £750 per day
including EMC engineer.
In the UK, I believe £1000 per day + test technician would be a reasonable
charge.
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
From: Kunde, Brian [mailto:brian
Dear colleagues;
I know this question has been asked before but would I be correct in stating
that under the FCC labelling requirements that if a product is deemed compliant
in the Verification category for an unintentional radiator that it is not
permitted to mark the product with the FCC mark
Many thanks to Rodney Davis for his help with my Level VI USA Energy efficiency
enquiry.
Regards;
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
Allen & Heath Ltd is a regi
Dear colleagues;
I understand that this question is slightly off topic but someone might know
the answer.
For USA level VI energy efficiency regulations, are power supplies intended for
professional use only included within the regulations or can they be exempted?
Many thanks in advance.
Ian M
Dear colleagues;
Can anyone let me know if there is website that lists all the amendments and
updates to a particular standard.
In this case I am interested to know all the latest updates to UL 60065.
Many thanks in advance;
Ian McBurney
Design & Compliance Engineer.
Allen & Heath Ltd.
Kernick
Dear colleagues.
Although not strictly an EMC or safety question I am hoping someone might be
able to help.
The new US DOE Energy Efficiency regulations for external power supplies (EPS
level VI) are due to become mandatory in February 2016 and now include
multi-output external power supplies.
state,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
-Original Message-
From: Richard Nute [mailto:ri...@ieee.org]
Sent: 21 January 2014 19:26
To: McBurney, Ian; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Rear panel marking
Dear Ian:
You have ente
Dear colleagues.
We have a product that is marked "Max Power 80W" on the rear panel.
I have been informed by the testing agency that this is not compliant with the
requirements of IEC 60065 because the actual power consumption is 82.1W.
The clause in the standard allows for a 10% tolerance but I
,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
From: Richard Nute [mailto:ri...@ieee.org]
Sent: 13 December 2013 20:06
To: McBurney, Ian; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Cooling fan safety query
Hello Ian:
The first question is whether or not
Sent: 13 December 2013 14:18
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Cooling fan safety query
In message
, dated Fri, 13 Dec 2013, "McBurney, Ian"
writes:
>but if the product continues to function "safely" with a stalled rotor
>why does it have to be listed in the
Heath Ltd.
Kernick Industrial Estate,
Penryn, Cornwall. TR10 9LU. UK
T: 01326 372070
E: ian.mcbur...@allen-heath.com
-Original Message-
From: John Allen [mailto:john_e_al...@blueyonder.co.uk]
Sent: 13 December 2013 13:31
To: McBurney, Ian; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES]
Message-
From: John Woodgate [mailto:j...@jmwa.demon.co.uk]
Sent: 13 December 2013 10:34
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Cooling fan safety query
In message
<80f690de07894e049b221728b4a99...@dbxpr07mb206.eurprd07.prod.outlook.com>
, dated Fri, 13 Dec 2013, "McBurney,
This is a question for the safety testing engineers.
We have products that contain 12V/24V DC cooling fans that cool either the PSU
or processing circuits.
The fan speeds are reduced with basically a series resistor to reduce audio
noise.
The safety testing agency demands to know the exact model
Dear colleagues;
Can anyone give me some advice regarding EMC regulatory requirements for
commercial products in Japan. Are there any mandatory requirements?
Is there a government organisation that issues proclamations regarding product
EMC compliance.
Is there a memorandum of understanding reco
Dear Colleagues;
I know this question has been ask before so please humour me.
We have an old product that was tested to the 1996 version of EN 55103 parts 1
& 2.
The latest versions are dated 2009 with some changes to testing.
Am I required to retest the product to the new version even though th
nces
In message
<7b970d3d82cee74c920c2e6b0d3b837720be4...@sn2prd0610mb358.namprd06.prod.o
utlook.com>, dated Fri, 23 Nov 2012, "Mcburney, Ian"
writes:
>We are developing a hand held product that is powered from +48V DC over
>Ethernet or from an external +12V DC wall wart PSU. The maximum
>internal voltag
Dear colleagues
We are developing a hand held product that is powered from +48V DC over
Ethernet or from an external +12V DC wall wart PSU. The maximum internal
voltage will be the +48V POE.
Can anyone let me know what the creepage and clearance requirements between the
"primary" Ethernet circu
Dear Colleagues
We are a manufacturer of audio mixing consoles with a range that varies from A4
size up to large 2m long 2 man lift consoles.
Most have internal ac/dc power supplies.
We are researching changing the way we power are future products to rationalise
the psu range as worldwide approv
ALL
If you're aged 75 or more, you don't have to pay for a Licence.
Ian McBurney
Design Engineer
Allen & Heath Ltd
Kernick Industrial Estate
Penryn, Cornwall
TR10 9LU
United Kingdom
+44 (0)1326 370121
ian.mcbur...@dmh-global.com
www.allen-heath.com
A DMH Pro Company.
-Original Message--
Dear Colleagues;
I would like to thank all those who contributed to answering my query regarding
the maximum measurement frequency for FCC compliance. In particular; thank you
to Bill Stumpf for the FCC document.
Thank you;
Ian McBurney
Design Engineer
Allen & Heath Ltd
Kernick Industrial Est
Dear Colleagues;
I am trying to establish the maximum measurement frequency for radiated
emissions for a digital device that is an unintentional radiator (part 15).
Is it set by the highest frequency generated internally in a microprocessor or
DSP or is it the maximum frequency that is tracked "
Dear Colleagues;
I'm sure this question has been asked before but I can't remember the answer.
My question concerns FCC labelling spare PCB assemblies.
These can be multilayer high speed processor boards shipped as spares to be
fitted into equipment that is already FCC labelled.
Would the packagi
Dear colleagues;
I would like to thank all those who replied to my PSE approval query in
particular Peter Merguerian and Jim Goedderz.
Thanks;
Ian McBurney.
Allen & Heath Ltd.
email:ian.mcbur...@allen-heath.com
P Please consider the environment - do you really need to print this e
Dear colleagues;
We are shipping a “wall wart” style psu bought in from a separate supplier
with one of our own products.
Our distributor in Japan requires the psu to be PSE marked.
The supplier of the psu has modified the psu rating label with the PSE diamond
and also put on the name of our
***LEGAL DISCLAIMER: READ THIS FIRST***
This Email and any files transmitted with it are confidential and intended
solely for the use of the individual to whom or the entity to which they are
addressed. If you have received this email in error please notify the sender
immediately. Please note that
***LEGAL DISCLAIMER: READ THIS FIRST***
This Email and any files transmitted with it are confidential and intended
solely for the use of the individual to whom or the entity to which they are
addressed. If you have received this email in error please notify the sender
immediately. Please note that
Does anyone have fabrication drawings for a 150mm Stripline they could send
me. I am keen to construct one from aluminium sheet.
thanks
Ian McBurney.
Allen & Heath Ltd.
email: ian.mcbur...@allen-heath.com
***DISCLAIMER***
This Email and any files transmitted with it are confidential and inte
Sirs;
Can anyone tell me when products tested to EN 50082-1:1992 and still in
production should have been retested because the 1992 standard has now been
superseded.
I assume any reports and declaration of conformity documents issued for
products declaring conformity with EN 50082-1:1992 are now
As a UK manufacturer and European exporter of professional electronic audio
products, we declare conformity with the relevant EMC product family
standards. For testing purposes, we use EN 55103:1996 Parts 1& 2 but our EU
Declaration of conformity states compliance with BS EN 55103:1997 Parts 1 & 2.
86 matches
Mail list logo
