Re: [PSES] OJEC list of harmonised standards

Hi Ralph, For EMC you can follow this link : https://ec.europa.eu/docsroom/documents/51314 For LVD: https://ec.europa.eu/docsroom/documents/57244 (this links directly to the summary .pdf files) Greetings, Bart From: rmm.priv...@gmail.com Sent: woensdag 17 april 2024 19:14 To: b

Re: [PSES] OJEC list of harmonised standards

Hi Ralph, Is this what you are looking for? https://single-market-economy.ec.europa.eu/single-market/european-standards/ harmonised-standards_en Greetings, Bart From: Ralph McDiarmid Sent: woensdag 17 april 2024 19:04 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] OJEC list o

Re: [PSES] Labelling in Canada

Hi Niels, Did you look into the below webpage? https://ised-isde.canada.ca/site/spectrum-management-telecommunications/en/devices-and-equipment/interference-causing-equipment-standards-ices/ices-gen-general-requirements-compliance-interference-causing-equipment#s5.3 Greetings, Bart

Re: [PSES] 50Hz Product and the EMC Directive

Hi Scott, The directive also states: ANNEX I ESSENTIAL REQUIREMENTS 1. General requirements Equipment shall be so designed and manufactured, having regard to the state of the art, as to ensure that: (a) the electromagnetic disturbance generated does not exceed the level above which

Re: [PSES] Immunity test field strength, residential setting

Hi Brian, Just for your information, in Europe residential EV chargers (for charging an EV with AC voltage), typically needs to fulfill the requirements of EN 61851-21-2 (product standard for off-board EV chargers). In this standard you will find the applicable test levels for immunity testi

Re: [PSES] FCC Part B questions

Hi Brian, F.Y.I. You can find the FCC rules online (so also Part 47) https://www.ecfr.gov/current/title-47/chapter-I/subchapter-A/part-15/subpart -B Greetings, Bart From: Brian Gregory Sent: zaterdag 8 juli 2023 6:38 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] FCC Part B ques

Re: [PSES] e-Labeling

Hi Peter, The below page indicates which labels exist: https://europa.eu/youreurope/business/product-requirements/labels-markings/index_en.htm How do you affix the CE label: The CE marking mus

Re: [PSES] CE marking of a high voltage output supply for laboratory / industrial environmental use

Thanks Gert, I agree with you that the LVD directive is indeed applicable: I looked up the original tekst which states the below: (the confusion was that another source was stating that both input and output voltages needed to fit within these limits, which does not seem to be the case.

[PSES] CE marking of a high voltage output supply for laboratory / industrial environmental use

Dear experts, A client is looking for regulatory guidance to CE certify a high voltage output supply (with regular AC mains 230V/50Hz input). The supply has an output voltage upto 25kV (upto 50kHz) output. It concerns a supply to be used for plasma reactor applications. As the output

Re: [PSES] ECE R10 - Addendum 9 - rev. 6 / Applicability of this regulation for ESA type of equipment with a particular 'interface type"

Thanks for the clarifications Matthew ! Your opinion matches with what we meanwhile also concluded. From: Matthew Wilson | GBE Sent: vrijdag 12 maart 2021 18:26 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] ECE R10 - Addendum 9 - rev. 6 / Applicability of this regulation for ESA

Re: [PSES] RED: Legal requirement to use LVD or EMCD Harmonized Standards

Hi Paul, Maybe you can look into the following document: https://ec.europa.eu/docsroom/documents/33162 Check paragraph 2.6. Greetings, Bart From: Paul Scott Sent: dinsdag 16 februari 2021 15:38 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] RED: Legal requirement to use LVD or EM

[PSES] ECE R10 - Addendum 9 - rev. 6 / Applicability of this regulation for ESA type of equipment with a particular 'interface type"

Dear All, In this regulation there is a flowchart under section 3.2.1 which helps you to determine whether this regulation is applicable for testing for Electrical/electronic sub assembly products (ESAs) At a certain moment the following question appears in this flowchart: "Connected via an

Re: [PSES] EN61000-4-6 adapters

Hi Derek, According to me Fig 8e is just a construction sample of a 150 Ohm to 50Ohm adapter. (An L-shaped metallic bracket). This bracket is put on top of the reference plane. (But this reference plane is not drawn in this picture). Typically this adapters are used when performing the 'refer

Re: [PSES] Measurement dilema

Hi Doug, Could it be that there is just a piece of transmission line inside the box terminated with a certain impedance? You might be measuring in the middle of this transmission line. If the input impedance selected on channel A of your oscilloscope is f.e 50 ohm and the

Re: [PSES] IEC 60601-1-2: 2014 Basic Safety and Essential Performance Pass/Fail Criteria

Hello David, I would refer to the following part of the EN60601-1-2: 6.1 General The documentation of the tests shall contain all the information necessary to facilitate adequate planning (test plan) and execution (test report) of the tests so that they can be readily reproduced. Compli