On Mon, 10 Nov 2003 15:28:36 -0500, john.radom...@modicon.com wrote:
>" ... The instructions accompanying
>the component must clearly indicate these requirements, the pertinent
>limitations of use and how to comply without resorting to an EMC specialist
>(such components are available to non-EMC s
On Mon, 3 Nov 2003 07:35:27 +0200, "Jon Griver"
wrote:
>Medical devices frequently include an equipotential terminal. It is used to
>ensure that all devices connected simultaneously to a patient are referenced
>to the same earth potential, otherwise any differences can cause a current
>through th
Are you thinking about an immunity test to verify your products are
'robust', or a standard that describes ways to minimize ESD on the
bench?
On Thu, 16 Oct 2003 10:52:13 EDT, lfresea...@aol.com wrote:
>I've been asked to advise on ESD standards to impose on a development lab,
>not a manufacturi
On Tue, 6 May 2003 17:35:49 +0200, "Franck GALVIN"
wrote:
>I perform conducted or radiated emission test with HP8594EM spectrum
>analyser or HP8656A receiver.
>To not have measurements errors I must enter correction factors (antenna
>or LISN, cable and other .).
>My questions are:
>1/ When you en
On Mon, 21 Apr 2003 08:28:19 -0700, ed.pr...@cubic.com wrote:
>>-Original Message-
>>From: Rich Nute [mailto:ri...@sdd.hp.com]
>>Sent: Friday, April 18, 2003 11:49 AM
>>To: richhug...@aol.com
>>Cc: peperkin...@cs.com; emc-p...@majordomo.ieee.org
>>Subject: Re: Symbols vs. text - was EN6101
5 matches
Mail list logo
