: 208-368-4892
Cell: 208-863-1439
QRA Engineering Labs - EMC/IO Group
EMC/EMI testing/certification and IOCAP characterization
Boise, Idaho
From: Kunde, Brian [mailto:brian_ku...@lecotc.com]
Sent: Wednesday, March 16, 2016 11:17 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Pre-Amp mounted
ssage-
From: Cortland Richmond [mailto:k...@earthlink.net]
Sent: Wednesday, March 16, 2016 3:24 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Pre-Amp mounted to antenna
On 3/16/2016 1:16 PM, Kunde, Brian wrote:
> We currently have a 22dB pre-amp which is fine for class A levels but
> a clo
arles.gra...@echostar.com>
(e2) chasgra...@gmail.com<mailto:chasgra...@gmail.com>
From: Kunde, Brian [mailto:brian_ku...@lecotc.com]
Sent: Tuesday, March 15, 2016 11:27 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Pre-Amp mounted to antenna
Greetings.
I'm looking for a low noise Pre-Amp
, 2016 11:27 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: [PSES] Pre-Amp mounted to antenna
Greetings.
I'm looking for a low noise Pre-Amp for Radiated Emissions 30Mhz to 1Ghz (or
higher) with a gain of 20-30dB; but here's the catch. I want it to mo
On 3/16/2016 1:16 PM, Kunde, Brian wrote:
We currently have a 22dB pre-amp which is fine for class A levels but
a close to 10dB+ above the noise floor near 1Ghz for class B. Moving
the amp to the antenna should gain us several dB due to cable loss.
Back in the '90's, I spent some of my own fund
I forgot to add this on my last post.
Nobody asked about a good pre-amp for use with that bias tee, but my
favorite for this application is a Nuwaves HILNAV1 pre-amp; really low 0.8
dB NF, and they will sell you the bare-board pre-amp, so you don't have to
mess with the big heat sink and case (
, March 15, 2016 9:02 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Pre-Amp mounted to antenna
Not exactly "turn key", but Mini-Circuits will sell you connectorized bias
Ts and DC blocks that will get the job done.
Hope that helps,
Brent DeWitt
Milford, MA
From: Ku
V.IEEE.ORG
Subject: [PSES] Pre-Amp mounted to antenna
Greetings.
I'm looking for a low noise Pre-Amp for Radiated Emissions 30Mhz to 1Ghz (or
higher) with a gain of 20-30dB; but here's the catch. I want it to mount
directly to the "N" connector on my BiLog Antenna and be
Greetings.
I'm looking for a low noise Pre-Amp for Radiated Emissions 30Mhz to 1Ghz (or
higher) with a gain of 20-30dB; but here's the catch. I want it to mount
directly to the "N" connector on my BiLog Antenna and be powered by a
downstream Power Supply box that sends DC down the coax. Just li
9 matches
Mail list logo